Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 73
Page 249
... observed . A detailed study was conducted on these cracks ( Kandeil and Holt , 1978 ) and it was concluded that the ... observed in composites forged at faster strain rates while less damage was observed in composites forged at slower ...
... observed . A detailed study was conducted on these cracks ( Kandeil and Holt , 1978 ) and it was concluded that the ... observed in composites forged at faster strain rates while less damage was observed in composites forged at slower ...
Page 577
This phenomenon was observed for all curing conditions , i.e. sealed , air - dry and water - saturated concrete . Splitting failure turned out to be the failure mechanism at room temperature for both mixes . Shear failure was observed ...
This phenomenon was observed for all curing conditions , i.e. sealed , air - dry and water - saturated concrete . Splitting failure turned out to be the failure mechanism at room temperature for both mixes . Shear failure was observed ...
Page 614
... observed between the as - welded and post weld heat treated condition . However a reduction in the frequency of low values was evident for the latter condition . 5 . Fracture initiation was observed for surface notched CTOD specimens ...
... observed between the as - welded and post weld heat treated condition . However a reduction in the frequency of low values was evident for the latter condition . 5 . Fracture initiation was observed for surface notched CTOD specimens ...
Contents
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Thickness Weld Profile and Initial Flaw Considerations for Tubular Joints | 39 |
Copyright | |
56 other sections not shown
Other editions - View all
Common terms and phrases
adhesion strength alloy aluminum analysis applied Arctic Engineering austenite axial base metal behaviour bending brace calculated cathodic protection Charpy chord composite Conference on Offshore corrosion fatigue crack depth crack front crack growth rate crack initiation crack propagation crevice corrosion CTOD defects developed energy equation experimental fabrication fatigue crack growth fatigue strength ferrite Figure finite element fracture mechanics fracture toughness geometry grade heat input heat treatment HSLA steels increase influence kJ/cm levels line spring load material mechanical properties Mechanics and Arctic method microstructure notch Offshore Mechanics offshore structures parameter pipe pitting pitting corrosion plate thickness predicted PWHT ratio reduced S-N curves shown in Fig solution specimens strain stress concentration stress intensity factor stress range submerged arc welding surface crack T-joints Table temperature tensile thickness effect tubular joints values wall thickness weld metal weld profile weld toe weldability welded joints yield strength