Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 77
Page 223
... performed on ISO - V test specimens . Toughness tests of thermally aged samples were performed using ISO - V test specimens machined from samples aged in the laboratory furnace followed by water quenching . Pitting corrosion behaviour ...
... performed on ISO - V test specimens . Toughness tests of thermally aged samples were performed using ISO - V test specimens machined from samples aged in the laboratory furnace followed by water quenching . Pitting corrosion behaviour ...
Page 367
... performed with an adapted filler metal on 30 and 50 millimeters thick plates ( Table 12 ) . WELDED JOINT ( transverse direction ) Distance Y.S.0.2 U.T.S. Rupture from ( MPa ) ( MPa ) fusion lind KCV HAZ • 40 ° C HV 10 max Samplings were ...
... performed with an adapted filler metal on 30 and 50 millimeters thick plates ( Table 12 ) . WELDED JOINT ( transverse direction ) Distance Y.S.0.2 U.T.S. Rupture from ( MPa ) ( MPa ) fusion lind KCV HAZ • 40 ° C HV 10 max Samplings were ...
Page 557
... performed in air and under cathodic protection in seawater . AKstart - 14 MPa √m . R = 0.2 Crack initiation The combined effect of AK , and the applied start potential on the initiation of fatigue cracks are shown in Figures 3a and 3b ...
... performed in air and under cathodic protection in seawater . AKstart - 14 MPa √m . R = 0.2 Crack initiation The combined effect of AK , and the applied start potential on the initiation of fatigue cracks are shown in Figures 3a and 3b ...
Contents
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Thickness Weld Profile and Initial Flaw Considerations for Tubular Joints | 39 |
Copyright | |
56 other sections not shown
Other editions - View all
Common terms and phrases
adhesion strength alloy aluminum analysis applied Arctic Engineering austenite axial base metal behaviour bending brace calculated cathodic protection Charpy chord composite Conference on Offshore corrosion fatigue crack depth crack front crack growth rate crack initiation crack propagation crevice corrosion CTOD defects developed energy equation experimental fabrication fatigue crack growth fatigue strength ferrite Figure finite element fracture mechanics fracture toughness geometry grade heat input heat treatment HSLA steels increase influence kJ/cm levels line spring load material mechanical properties Mechanics and Arctic method microstructure notch Offshore Mechanics offshore structures parameter pipe pitting pitting corrosion plate thickness predicted PWHT ratio reduced S-N curves shown in Fig solution specimens strain stress concentration stress intensity factor stress range submerged arc welding surface crack T-joints Table temperature tensile thickness effect tubular joints values wall thickness weld metal weld profile weld toe weldability welded joints yield strength