Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 76
Page 223
... performed according to the relevant german properties standards . Notch - impact tests were performed on ISO - V test specimens . Toughness tests of thermally aged samples performed using from samples furnace followed by were specimens ...
... performed according to the relevant german properties standards . Notch - impact tests were performed on ISO - V test specimens . Toughness tests of thermally aged samples performed using from samples furnace followed by were specimens ...
Page 367
... performed with an adapted filler metal on 30 and 50 millimeters thick plates ( Table 12 ) . WELDED JOINT ( transverse direction ) Distance Y.S.0.2 U.T.S. Rupture from ( MPa ) ( MPA ) Samplings were realized in both base metal and heat ...
... performed with an adapted filler metal on 30 and 50 millimeters thick plates ( Table 12 ) . WELDED JOINT ( transverse direction ) Distance Y.S.0.2 U.T.S. Rupture from ( MPa ) ( MPA ) Samplings were realized in both base metal and heat ...
Page 712
... performed with three median values of the stress ranges , viz . Ao = 150 MPa , Aσ = 350 MPa , and so 550 MPa . From the strain gauge measurements , the best fitting distribution was found to be a 3 - parameter Weibull distribution : -X ...
... performed with three median values of the stress ranges , viz . Ao = 150 MPa , Aσ = 350 MPa , and so 550 MPa . From the strain gauge measurements , the best fitting distribution was found to be a 3 - parameter Weibull distribution : -X ...
Contents
THICKNESS EFFECTS | 1 |
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Copyright | |
56 other sections not shown
Other editions - View all
Common terms and phrases
alloy aluminum analysis applied Arctic Engineering ASTM austenite axial base metal behaviour bending brace calculated cathodic protection Charpy chord Conference on Offshore corrosion fatigue crack depth crack growth rate crack initiation crack propagation crevice corrosion CTOD da/dN defects developed equation experimental fabrication fatigue crack growth fatigue strength fatigue test ferrite Figure fillet welds finite element fracture mechanics fracture toughness geometry grade heat input heat treatment HSLA steels increase influence kJ/cm load material mechanical properties Mechanics and Arctic method microstructure notch obtained Offshore Mechanics Offshore Structures parameters pipe pitting plate thickness predicted procedure PWHT ratio reduced reheated S-N curves seawater Shoralsim shown in Fig solution specimens Steel in Marine strain stress concentration stress intensity factor stress range submerged arc welding surface crack T-joints Table temperature tensile thickness effect tubular joints values weld metal weld profile weld toe weldability welded joints yield strength