Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 79
Page 60
With due regard to the applicable specifications , the relevant procedures must give precise description of all test details , covering evaluation , acceptance standard and reporting procedure . All applicable procedures must be listed ...
With due regard to the applicable specifications , the relevant procedures must give precise description of all test details , covering evaluation , acceptance standard and reporting procedure . All applicable procedures must be listed ...
Page 280
Procedures Welder and Welding Operator Qualifications All the foregoing would be meaningless without a definitive set of ... With the correct values achieved , the procedure data sheet is stamped " approved " and becomes part of the ...
Procedures Welder and Welding Operator Qualifications All the foregoing would be meaningless without a definitive set of ... With the correct values achieved , the procedure data sheet is stamped " approved " and becomes part of the ...
Page 614
Fracture initiation was observed for surface notched CTOD specimens from the Vee weld procedure ( steel B ) . ... at -10 ° C in both the as - welded and PWHT conditions and for all weld procedures ( 10 % GC , 30 % GC and Vee weld ) .
Fracture initiation was observed for surface notched CTOD specimens from the Vee weld procedure ( steel B ) . ... at -10 ° C in both the as - welded and PWHT conditions and for all weld procedures ( 10 % GC , 30 % GC and Vee weld ) .
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
THICKNESS EFFECTS | 1 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Thickness Weld Profile and Initial Flaw Considerations for Tubular Joints | 39 |
Copyright | |
46 other sections not shown
Other editions - View all
Common terms and phrases
alloy analysis applied base behaviour bending calculated carried compared composition concrete Conference constant corrosion crack growth CTOD curve cycles defect depth determined developed distribution effect element energy Engineering equation experimental fabrication factor failure fatigue crack Figure fracture function geometry given grade grain heat higher improved increase indicated influence initiation input inspection International length limited load lower material mean measured mechanical method microstructure normal notch observed obtained occur Offshore parameters performed pipe plate potential predicted present procedure production properties protection range ratio reduced region Research shown shows specimens standard steel strain strength stress stress intensity factor stress range structure surface Table temperature tensile thickness toughness tubular joints values weld metal weld toe welded joints wide plate yield strength
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3 |
| Contributor | American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division |
| Publisher | American Society of Mechanical Engineers, 1989 |
| Export Citation | BiBTeX EndNote RefMan |