Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 71
Page 358
grades of cast steel; where in all cases the weldability of cast steels were the same as or better than the comparable wrought grades of material. However, much still needs to be learned about the weldability of HSLA steels (and the ...
grades of cast steel; where in all cases the weldability of cast steels were the same as or better than the comparable wrought grades of material. However, much still needs to be learned about the weldability of HSLA steels (and the ...
Page 552
Of the tests on the normalized steel in seawater with cathodic protection at the base stress ranges (including small and large scale tests) 2 showed enhancement to greater than air life, one to .lust below air "M f #» and in one no ...
Of the tests on the normalized steel in seawater with cathodic protection at the base stress ranges (including small and large scale tests) 2 showed enhancement to greater than air life, one to .lust below air "M f #» and in one no ...
Page 696
0.99 € 0.9 ( ) ; CTOD of 10 % probability * Steel 1 ( Norma . ) ... ( 7 ) A Steel 3 ( TMCP ) ( 7 ) Details are shown in Table 2 . ... 11 Cumulative Weibull plots for CTOD values of normalized and TMCP steels in Ref . ( 7 ) .
0.99 € 0.9 ( ) ; CTOD of 10 % probability * Steel 1 ( Norma . ) ... ( 7 ) A Steel 3 ( TMCP ) ( 7 ) Details are shown in Table 2 . ... 11 Cumulative Weibull plots for CTOD values of normalized and TMCP steels in Ref . ( 7 ) .
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
THICKNESS EFFECTS | 1 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Thickness Weld Profile and Initial Flaw Considerations for Tubular Joints | 39 |
Copyright | |
46 other sections not shown
Other editions - View all
Common terms and phrases
alloy analysis applied base behaviour bending calculated carried compared composition concrete Conference constant corrosion crack growth CTOD curve cycles defect depth determined developed distribution effect element energy Engineering equation experimental fabrication factor failure fatigue crack Figure fracture function geometry given grade grain heat higher improved increase indicated influence initiation input inspection International length limited load lower material mean measured mechanical method microstructure normal notch observed obtained occur Offshore parameters performed pipe plate potential predicted present procedure production properties protection range ratio reduced region Research shown shows specimens standard steel strain strength stress stress intensity factor stress range structure surface Table temperature tensile thickness toughness tubular joints values weld metal weld toe welded joints wide plate yield strength
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3 |
| Contributor | American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division |
| Publisher | American Society of Mechanical Engineers, 1989 |
| Export Citation | BiBTeX EndNote RefMan |