Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 73
Page 322
... yield strength vs. tensile strength Uniform Elongation , ( % ) 30 20 10 50 60 70 80 90 100 Yield to tensile ratio , YR ( % ) Fig.2 Relationship between uniform elongation obtained by uniaxial tensile test and yield to tensile ratio 100 ...
... yield strength vs. tensile strength Uniform Elongation , ( % ) 30 20 10 50 60 70 80 90 100 Yield to tensile ratio , YR ( % ) Fig.2 Relationship between uniform elongation obtained by uniaxial tensile test and yield to tensile ratio 100 ...
Page 634
... yield strengths will be compared in order establish the actual degree of weld metal yield strength overmatching of two different offshore steel grades . to MATERIALS AND EXPERIMENTAL WORK . To enable the examination of the actual degree ...
... yield strengths will be compared in order establish the actual degree of weld metal yield strength overmatching of two different offshore steel grades . to MATERIALS AND EXPERIMENTAL WORK . To enable the examination of the actual degree ...
Page 638
... yield strength spread is lower so that the frequency of weld metal yield strength undermatching as observed for TMCP steels is less likely to occur in weldments of 420 / - 450 MPa yield strength QT steel grades . On the basis of the ...
... yield strength spread is lower so that the frequency of weld metal yield strength undermatching as observed for TMCP steels is less likely to occur in weldments of 420 / - 450 MPa yield strength QT steel grades . On the basis of the ...
Contents
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Thickness Weld Profile and Initial Flaw Considerations for Tubular Joints | 39 |
Copyright | |
56 other sections not shown
Other editions - View all
Common terms and phrases
adhesion strength alloy aluminum analysis applied Arctic Engineering austenite axial base metal behaviour bending brace calculated cathodic protection Charpy chord composite Conference on Offshore corrosion fatigue crack depth crack front crack growth rate crack initiation crack propagation crevice corrosion CTOD defects developed energy equation experimental fabrication fatigue crack growth fatigue strength ferrite Figure finite element fracture mechanics fracture toughness geometry grade heat input heat treatment HSLA steels increase influence kJ/cm levels line spring load material mechanical properties Mechanics and Arctic method microstructure notch Offshore Mechanics offshore structures parameter pipe pitting pitting corrosion plate thickness predicted PWHT ratio reduced S-N curves shown in Fig solution specimens strain stress concentration stress intensity factor stress range submerged arc welding surface crack T-joints Table temperature tensile thickness effect tubular joints values wall thickness weld metal weld profile weld toe weldability welded joints yield strength