Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 16, Parts 2-3American Society of Mechanical Engineers, 1997 - Arctic regions |
From inside the book
Results 1-3 of 70
Page 150
resin coating thickness and number of cycles to failure . The influence of tar epoxy resin coating thickness on corrosion fatigue life is slightly observed in N , lower than 105 cycles . 600 Nominal stress range . AS ( MPa ) 500 400 AS ...
resin coating thickness and number of cycles to failure . The influence of tar epoxy resin coating thickness on corrosion fatigue life is slightly observed in N , lower than 105 cycles . 600 Nominal stress range . AS ( MPa ) 500 400 AS ...
Page 152
... thickness 50 μm Specimen - A 8 . 10 c 1200 2400 3600 Time ( h ) 4800 6000 Coating thickness 100 μm Specimen -A 8 1200 2400 3600 4800 Time ( h ) Coating thickness 200μm Specimen --A ------ 8 -111 6000 5000 10000 Time ( h ) 15000 Coating ...
... thickness 50 μm Specimen - A 8 . 10 c 1200 2400 3600 Time ( h ) 4800 6000 Coating thickness 100 μm Specimen -A 8 1200 2400 3600 4800 Time ( h ) Coating thickness 200μm Specimen --A ------ 8 -111 6000 5000 10000 Time ( h ) 15000 Coating ...
Page 184
... thickness Hmax , d , which may be done by two ways , one is to perform statistic analysis on daily ice thickness data which is available , other is basing on the probabilistic distribution for annual extreme ice thickness . Let the ...
... thickness Hmax , d , which may be done by two ways , one is to perform statistic analysis on daily ice thickness data which is available , other is basing on the probabilistic distribution for annual extreme ice thickness . Let the ...
Contents
SPECTRAL MODELLING OF WAVES | 1 |
RISK ANALYSIS | 33 |
PROBABILISTIC MODELLING OF WAVES | 99 |
Copyright | |
6 other sections not shown
Other editions - View all
Common terms and phrases
alloys aluminium analysis applied ASME assessment base metal bending brittle fracture calculated coefficient corrosion fatigue crack arrestability crack depth crack growth crack tip CTOD curve damage defects deformation dent Det Norske Veritas developed distribution dynamic earthquake effect energy Engineering equation estimated evaluated factor failure fatigue crack Figure fracture mechanics fracture toughness frequency function heat increase initiation inspection Japan maintenance martensitic material maximum mbar measured mechanical properties method notch observed obtained offshore structures OMAE parameters peening performed pipe plastic platform prediction pressure procedure ratio reliability response risers S-N curve safety sea water seismic shielding gas ship shown in Fig simulation single-sided welds specimens spectra spectrum statistical steel plate strain stress range surface Table temperature tensile toughness tubular underwater underwater welding vertical wave height Weibull distribution weld metal welded joints width yield strength yield stress