Results 1-3 of 77
For a crack at the interior the length is 2c, while for an edge crack it is c. The effect
of both types of crack on the fracture behavior is the same. The stress distribution
for an elliptical crack was determined by Inglis.1 A decrease in strain energy ...
7-14 Three modes of crack growth, (a) Unstable brittle fracture without slow crack
growth; (6) slow crack growth (ductile) followed by unstable brittle fracture; (c)
slow growth at constant stress. (After Tetleman and McEvily.) in a very small
The need for a correction to crack length for the small plastic zone at the crack tip
was recognized at an early stage in the development of linear elastic fracture
mechanics (see Sec. 7-9). When the plastic zone becomes an appreciable
What people are saying - Write a review
Actually, this book is one of the most important books for a metallurgist and materials scientist, and is necessary to be studied!!
One of the best books for Metallurgy. You will always need this book throughout your life (considering you are a Metallurgist).
Elements of the Theory of Plasticity
Plastic Deformation of Single Crystals
19 other sections not shown