Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 18, Part 4American Society of Mechanical Engineers, 1999 - Arctic regions |
From inside the book
Results 1-3 of 61
Page 74
... internal pressure and the effect of traditional circumferential girth - welds in the test specimen . In all tests , the internal pressure and axial load were kept constant while the global curvature over the length of the specimen was ...
... internal pressure and the effect of traditional circumferential girth - welds in the test specimen . In all tests , the internal pressure and axial load were kept constant while the global curvature over the length of the specimen was ...
Page 75
... internal pressure , as previously outlined . A final letter is added to denote whether a circumferential weld was present on the test specimen . The letter ' N ' is used to indicate a plain test specimen ( no circumferential weld ) and ...
... internal pressure , as previously outlined . A final letter is added to denote whether a circumferential weld was present on the test specimen . The letter ' N ' is used to indicate a plain test specimen ( no circumferential weld ) and ...
Page 80
... internal pressure was 13.5 % greater than that for the specimen tested at 0 % internal pressure . Further increase of internal pressure resulted in a decrease in peak moment . The global curvatures at the initiation of local buckling ...
... internal pressure was 13.5 % greater than that for the specimen tested at 0 % internal pressure . Further increase of internal pressure resulted in a decrease in peak moment . The global curvatures at the initiation of local buckling ...
Contents
PIPELINE RELIABILITY AND LIMIT STATES DESIGN | 1 |
DESIGN OF PIPELINES AND RISERS | 5 |
OMAE99PIPE5019 | 21 |
Copyright | |
30 other sections not shown
Other editions - View all
Common terms and phrases
analysis applied Arctic Engineering ASME assessment autoclave axial force bending buckling calculated capacity Conference On Offshore Copyright corrosion corrosion defect crack defined deformation dent depth Det Norske Veritas developed diameter discrete displacement vector effect equation failure modes failure probability Figure finite element finite element analysis fracture friction function fuzzy logic gasket geotechnical engineering GTAW hoop stress hot tap tee InSAR installation internal pressure jumper length Limit State Design load longitudinal MANAVGAT material maximum measured Mechanics and Arctic modal displacement neural networks node Offshore Mechanics operating pressure ovalisation parameters Petrobras pipe material pipe wall pipeline design Pipeline Systems plastic reliability riser risk run pipe saddle safety class seabed simulation SMAW SMYS specimens stinger strain stress Table Technology temperature tensile test scheme uprating valve wall thickness yield strength ας მთ მი მს