Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 18, Part 4American Society of Mechanical Engineers, 1999 - Arctic regions |
From inside the book
Results 1-3 of 79
Page 27
... operating pressure , P. Probability of Failure CONCLUSIONS 1 . 2 . 3 . 4 . The feasibility of uprating a 36 " subsea high pressure gas transmission pipeline has been investigated using a structural reliability based methodology ...
... operating pressure , P. Probability of Failure CONCLUSIONS 1 . 2 . 3 . 4 . The feasibility of uprating a 36 " subsea high pressure gas transmission pipeline has been investigated using a structural reliability based methodology ...
Page 47
... operating pressure for three defect depths for 30 % , 50 % and 70 % of t . The allowable operating pressure is highly dependent on the accuracy of the inspection tool . This effect is illustrated in Figure 4 , which shows allowable ...
... operating pressure for three defect depths for 30 % , 50 % and 70 % of t . The allowable operating pressure is highly dependent on the accuracy of the inspection tool . This effect is illustrated in Figure 4 , which shows allowable ...
Page 59
Peak Operating Pressure Integrity The minimum required pipe wall thickness is estimated as a function of the peak operating pressure by ensuring that the pipe hoop stress does not exceed an allowable fraction of the specified minimum ...
Peak Operating Pressure Integrity The minimum required pipe wall thickness is estimated as a function of the peak operating pressure by ensuring that the pipe hoop stress does not exceed an allowable fraction of the specified minimum ...
Contents
PIPELINE RELIABILITY AND LIMIT STATES DESIGN | 1 |
DESIGN OF PIPELINES AND RISERS | 5 |
OMAE99PIPE5019 | 21 |
Copyright | |
30 other sections not shown
Other editions - View all
Common terms and phrases
analysis applied Arctic Engineering ASME assessment autoclave axial force bending buckling calculated capacity Conference On Offshore Copyright corrosion corrosion defect crack defined deformation dent depth Det Norske Veritas developed diameter discrete displacement vector effect equation failure modes failure probability Figure finite element finite element analysis fracture friction function fuzzy logic gasket geotechnical engineering GTAW hoop stress hot tap tee InSAR installation internal pressure jumper length Limit State Design load longitudinal MANAVGAT material maximum measured Mechanics and Arctic modal displacement neural networks node Offshore Mechanics operating pressure ovalisation parameters Petrobras pipe material pipe wall pipeline design Pipeline Systems plastic reliability riser risk run pipe saddle safety class seabed simulation SMAW SMYS specimens stinger strain stress Table Technology temperature tensile test scheme uprating valve wall thickness yield strength ας მთ მი მს