Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 18, Part 4American Society of Mechanical Engineers, 1999 - Arctic regions |
From inside the book
Results 1-3 of 61
Page 21
... parameters of the pipeline are listed in Table 1 . Outer Diameter Parameter Value 914.4 mm Nominal Wall Thickness SMYS 15.88 mm 448 MPa 100 barg 132 barg Design Pressure Hydrostatic Test Pressure Table 1 - Pipeline Design Parameters The ...
... parameters of the pipeline are listed in Table 1 . Outer Diameter Parameter Value 914.4 mm Nominal Wall Thickness SMYS 15.88 mm 448 MPa 100 barg 132 barg Design Pressure Hydrostatic Test Pressure Table 1 - Pipeline Design Parameters The ...
Page 22
... parameters the variability may be slight and / or the limit state function may be sufficiently insensitive to the parameter such that a single valued estimate of the parameter may be adequate for the study . Best estimates or upper and ...
... parameters the variability may be slight and / or the limit state function may be sufficiently insensitive to the parameter such that a single valued estimate of the parameter may be adequate for the study . Best estimates or upper and ...
Page 294
... Parameters and Variables Pipeline , Operational and Environmental Data The pipeline data presented in table 1 has been used . The required wall ... Parameters The basic parameters are summarised in table Copyright ( C ) 1999 by ASME.
... Parameters and Variables Pipeline , Operational and Environmental Data The pipeline data presented in table 1 has been used . The required wall ... Parameters The basic parameters are summarised in table Copyright ( C ) 1999 by ASME.
Contents
PIPELINE RELIABILITY AND LIMIT STATES DESIGN | 1 |
DESIGN OF PIPELINES AND RISERS | 5 |
OMAE99PIPE5019 | 21 |
Copyright | |
30 other sections not shown
Other editions - View all
Common terms and phrases
analysis applied Arctic Engineering ASME assessment autoclave axial force bending buckling calculated capacity Conference On Offshore Copyright corrosion corrosion defect crack defined deformation dent depth Det Norske Veritas developed diameter discrete displacement vector effect equation failure modes failure probability Figure finite element finite element analysis fracture friction function fuzzy logic gasket geotechnical engineering GTAW hoop stress hot tap tee InSAR installation internal pressure jumper length Limit State Design load longitudinal MANAVGAT material maximum measured Mechanics and Arctic modal displacement neural networks node Offshore Mechanics operating pressure ovalisation parameters Petrobras pipe material pipe wall pipeline design Pipeline Systems plastic reliability riser risk run pipe saddle safety class seabed simulation SMAW SMYS specimens stinger strain stress Table Technology temperature tensile test scheme uprating valve wall thickness yield strength ας მთ მი მს