## Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 18, Part 4American Society of Mechanical Engineers, 1999 - Arctic regions |

### From inside the book

Results 1-3 of 45

Page 50

Modelling of the ability of the burst capacity equation to

capacity obtained from the FE analyses . 2. Modelling of the ability of the finite

element analyses to

tests .

Modelling of the ability of the burst capacity equation to

**represent**the burstcapacity obtained from the FE analyses . 2. Modelling of the ability of the finite

element analyses to

**represent**the burst capacity obtained from the laboratorytests .

Page 204

Customary terms used to describe this S - lay pipe configuration are overbend ,

inflection point and underbend , or sagbend . where the three constants

twisting ...

Customary terms used to describe this S - lay pipe configuration are overbend ,

inflection point and underbend , or sagbend . where the three constants

**represent**section - factors and T = axial force , My = bending moment and M , =twisting ...

Page 223

The value of a QV can be

such as " decreasing rapidly " , " cold " , " low " or " not ... Standard membership

functions are used to

The value of a QV can be

**represented**by linguistic terms used by human expertssuch as " decreasing rapidly " , " cold " , " low " or " not ... Standard membership

functions are used to

**represent**all the input and output fuzzy sets in this problem .### What people are saying - Write a review

We haven't found any reviews in the usual places.

### Contents

PIPELINE RELIABILITY AND LIMIT STATES DESIGN | 1 |

DESIGN OF PIPELINES AND RISERS | 5 |

OMAE99PIPE5019 | 21 |

Copyright | |

22 other sections not shown

### Other editions - View all

### Common terms and phrases

acceptable allowable analysis applied approach ASME assessment associated assumed axial bending branch buckling calculated capacity Conference considered construction Copyright corrosion cost crack defect defined deformation dent depth described determine developed diameter direction displacement effect element Engineering equation factor failure field Figure finite element force fracture function fuzzy given heat increase initial input inspection installation internal internal pressure length limit load material maximum measured Mechanics method modes neural networks obtained occur Offshore operating parameters performed pipe pipeline plastic possible predicted presented pressure probability problem range reduce reliability represent respectively risk safety sand shown shows soil specified specimens standard steel strain strength stress structural surface Table Technology temperature valve wall thickness weld yield