Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 18, Part 4American Society of Mechanical Engineers, 1999 - Arctic regions |
From inside the book
Results 1-3 of 20
Page 93
... sand . Although the seabed material at the field site is estimated to be predominantly cohesive , it was decided to perform the experiments mainly on sand for two reasons . Firstly the sand beds were expected to give very repeatable ...
... sand . Although the seabed material at the field site is estimated to be predominantly cohesive , it was decided to perform the experiments mainly on sand for two reasons . Firstly the sand beds were expected to give very repeatable ...
Page 98
... Sand 07/11/96 1 Straight 8 " / 10 " Sand 11/11/96 2 Pull round 8 " / 10 " 30E Sand 22/11/96 1b Straight 8 " / 10 " Sand 11/11/96 2b Pull round 8 " / 10 " 45E Sand 22/11/96 3 Straight 8 " / 10 " Clay 09/12/96 4 Pull round 8 " / 10 " 45E ...
... Sand 07/11/96 1 Straight 8 " / 10 " Sand 11/11/96 2 Pull round 8 " / 10 " 30E Sand 22/11/96 1b Straight 8 " / 10 " Sand 11/11/96 2b Pull round 8 " / 10 " 45E Sand 22/11/96 3 Straight 8 " / 10 " Clay 09/12/96 4 Pull round 8 " / 10 " 45E ...
Page 114
... sand were determined using a direct shear box with sand samples tested at different stress levels . The grading and maximum and minimum densities of the sand were also determined . The averaged results of the laboratory tests are ...
... sand were determined using a direct shear box with sand samples tested at different stress levels . The grading and maximum and minimum densities of the sand were also determined . The averaged results of the laboratory tests are ...
Contents
PIPELINE RELIABILITY AND LIMIT STATES DESIGN | 1 |
DESIGN OF PIPELINES AND RISERS | 5 |
OMAE99PIPE5019 | 21 |
Copyright | |
30 other sections not shown
Other editions - View all
Common terms and phrases
analysis applied Arctic Engineering ASME assessment autoclave axial force bending buckling calculated capacity Conference On Offshore Copyright corrosion corrosion defect crack defined deformation dent depth Det Norske Veritas developed diameter discrete displacement vector effect equation failure modes failure probability Figure finite element finite element analysis fracture friction function fuzzy logic gasket geotechnical engineering GTAW hoop stress hot tap tee InSAR installation internal pressure jumper length Limit State Design load longitudinal MANAVGAT material maximum measured Mechanics and Arctic modal displacement neural networks node Offshore Mechanics operating pressure ovalisation parameters Petrobras pipe material pipe wall pipeline design Pipeline Systems plastic reliability riser risk run pipe saddle safety class seabed simulation SMAW SMYS specimens stinger strain stress Table Technology temperature tensile test scheme uprating valve wall thickness yield strength ας მთ მი მს