Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 18, Part 4American Society of Mechanical Engineers, 1999 - Arctic regions |
From inside the book
Results 1-3 of 19
Page 74
... specimens under combined loads . Yoosef - Ghodsi , et al . ( 1994 ) examined specimens of the same size but with circumferential girth welds at the mid - height . The diameter - to - thickness ( D / t ) ratios for the test specimens ...
... specimens under combined loads . Yoosef - Ghodsi , et al . ( 1994 ) examined specimens of the same size but with circumferential girth welds at the mid - height . The diameter - to - thickness ( D / t ) ratios for the test specimens ...
Page 77
... specimens . This was done to help alleviate the end effects arising from the constraint that the 76 mm thick end plates provided to the test specimen under load . 6. Once the specified test pressure and net axial wall force had been ...
... specimens . This was done to help alleviate the end effects arising from the constraint that the 76 mm thick end plates provided to the test specimen under load . 6. Once the specified test pressure and net axial wall force had been ...
Page 79
... specimen . moments applied at the ends of the specimens . The plotted curvature is the sum of the change in angle measured by the two rotation meters divided by the length of the specimen and will be called the ' global curvature ...
... specimen . moments applied at the ends of the specimens . The plotted curvature is the sum of the change in angle measured by the two rotation meters divided by the length of the specimen and will be called the ' global curvature ...
Contents
PIPELINE RELIABILITY AND LIMIT STATES DESIGN | 1 |
DESIGN OF PIPELINES AND RISERS | 5 |
OMAE99PIPE5019 | 21 |
Copyright | |
30 other sections not shown
Other editions - View all
Common terms and phrases
analysis applied Arctic Engineering ASME assessment autoclave axial force bending buckling calculated capacity Conference On Offshore Copyright corrosion corrosion defect crack defined deformation dent depth Det Norske Veritas developed diameter discrete displacement vector effect equation failure modes failure probability Figure finite element finite element analysis fracture friction function fuzzy logic gasket geotechnical engineering GTAW hoop stress hot tap tee InSAR installation internal pressure jumper length Limit State Design load longitudinal MANAVGAT material maximum measured Mechanics and Arctic modal displacement neural networks node Offshore Mechanics operating pressure ovalisation parameters Petrobras pipe material pipe wall pipeline design Pipeline Systems plastic reliability riser risk run pipe saddle safety class seabed simulation SMAW SMYS specimens stinger strain stress Table Technology temperature tensile test scheme uprating valve wall thickness yield strength ας მთ მი მს