Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 18, Part 4American Society of Mechanical Engineers, 1999 - Arctic regions |
From inside the book
Results 1-3 of 54
Page 115
... Surface profiling systems and displacement transducers were used to periodically monitor surface displacements of the sand bed during pipe displacement . Instrumentation was also placed within the sand bed to monitor internal soil ...
... Surface profiling systems and displacement transducers were used to periodically monitor surface displacements of the sand bed during pipe displacement . Instrumentation was also placed within the sand bed to monitor internal soil ...
Page 116
... surface were made with a vibratory tamper . This process was repeated for each lift until the soil reached the final elevation . Density checks were made throughout the preparation procedure and after the tests were completed . The surface ...
... surface were made with a vibratory tamper . This process was repeated for each lift until the soil reached the final elevation . Density checks were made throughout the preparation procedure and after the tests were completed . The surface ...
Page 174
... Surface , Adjacent to Weld 1500.0 1000.0 500.0 0.0 0 45 90 135 180 225 Angle ( deg ) 270 315 380 Bonded P & P Mam Press . Crty P & OP Mam Strain ( x 10 ° ) 7000 6000 5000 Tangential Strain , Outside Surface , Adjacent to Weld 4000 3000 ...
... Surface , Adjacent to Weld 1500.0 1000.0 500.0 0.0 0 45 90 135 180 225 Angle ( deg ) 270 315 380 Bonded P & P Mam Press . Crty P & OP Mam Strain ( x 10 ° ) 7000 6000 5000 Tangential Strain , Outside Surface , Adjacent to Weld 4000 3000 ...
Contents
PIPELINE RELIABILITY AND LIMIT STATES DESIGN | 1 |
DESIGN OF PIPELINES AND RISERS | 5 |
OMAE99PIPE5019 | 21 |
Copyright | |
30 other sections not shown
Other editions - View all
Common terms and phrases
analysis applied Arctic Engineering ASME assessment autoclave axial force bending buckling calculated capacity Conference On Offshore Copyright corrosion corrosion defect crack defined deformation dent depth Det Norske Veritas developed diameter discrete displacement vector effect equation failure modes failure probability Figure finite element finite element analysis fracture friction function fuzzy logic gasket geotechnical engineering GTAW hoop stress hot tap tee InSAR installation internal pressure jumper length Limit State Design load longitudinal MANAVGAT material maximum measured Mechanics and Arctic modal displacement neural networks node Offshore Mechanics operating pressure ovalisation parameters Petrobras pipe material pipe wall pipeline design Pipeline Systems plastic reliability riser risk run pipe saddle safety class seabed simulation SMAW SMYS specimens stinger strain stress Table Technology temperature tensile test scheme uprating valve wall thickness yield strength ας მთ მი მს