## MECHANICAL METALLURGY |

### From inside the book

Results 1-3 of 81

Page 174

many dislocation lines is the sum of the strain energies of the individual

dislocations, plus terms expressing the interactions of the stress fields of the

dislocations, plus a term describing the internal stresses developed by the

external

many dislocation lines is the sum of the strain energies of the individual

dislocations, plus terms expressing the interactions of the stress fields of the

dislocations, plus a term describing the internal stresses developed by the

external

**forces**.Page 192

Theoretical Cohesive Strength of Metals Metals are of great technological value,

primarily because of their high strength combined with a certain measure of

plasticity. In the most basic terms the strength is due to the cohesive

between ...

Theoretical Cohesive Strength of Metals Metals are of great technological value,

primarily because of their high strength combined with a certain measure of

plasticity. In the most basic terms the strength is due to the cohesive

**forces**between ...

Page 566

A major contribution to the friction

lorce component peaks early and decreases with increasing travel because the

area of the blank under the hold-down ring is continually decreasing. Any

A major contribution to the friction

**force**comes from the hold-down pressure. Thislorce component peaks early and decreases with increasing travel because the

area of the blank under the hold-down ring is continually decreasing. Any

**force**...### What people are saying - Write a review

We haven't found any reviews in the usual places.

### Contents

Stress and Strain Relationships for Elastic Behavior | 17 |

Elements of the Theory of Plasticity | 54 |

Plastic Deformation of Single Crystals | 81 |

Copyright | |

19 other sections not shown

### Other editions - View all

### Common terms and phrases

alloys aluminum angle annealing ASTM axis behavior bending billet brittle fracture Burgers vector cent compressive constant crack creep rate decrease determined diameter direction dislocation line distribution drawing ductile edge dislocation effect elastic elongation equation extrusion factor failure fatigue limit flow curve flow stress force forging forming friction given grain boundaries hardness high-temperature increase indentation lattice length load longitudinal mandrel martensite material maximum measured mechanical metallurgical Metals Park method modulus notch obtained occurs orientation particles plastic deformation pressure principal stresses Proc produced properties punch quenched radius ratio recrystallization region relationship residual stresses rolling screw dislocations shear stress sheet shown in Fig shows single crystals slip plane Society for Metals specimen steel strain energy strain hardening strain rate stress-strain curve structure surface temper tensile strength tensile stress theory thickness tion torsion Trans transition temperature tube usually yield point yield strength yield stress