Fundamentals of Creep in Metals and Alloys* Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion Understanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world’s leading investigators. |
From inside the book
Results 1-5 of 27
... Subgrain Size, Frank Network Dislocation Density, Subgrain Misorientation Angle, and the Dislocation Separation within the Subgrain Walls in Steady-State Structures 2.2.2 Constant Structure Equations 2.2.3 Primary Creep Microstructures ...
... subgrain walls s applied uniaxial stress s i internal stress s 0 single crystal yield strength s0 s00 0 0 annealed polycrystal yield strength sintering stress for a cavity s p Peierls stress s ss uniaxial steady-state stress s T ...
... Subgrain Size, Frank Network Dislocation Density, Subgrain Misorientation Angle, and the Dislocation Separation within the Subgrain Walls in Steady-State Structures 2.2.2. Constant Structure Equations 2.2.3. Primary Creep ...
... Subgrain Size, Frank Network Dislocation Density, Subgrain Misorientation Angle, and the Dislocation Separation within the Subgrain Walls in Steady-State Structures Certain trends in the dislocation substructure evolution have been ...
... subgrain boundaries. Figure 20 is a TEM micrograph of 304 austenitic stainless steel, a class M alloy, deformed to steady-state within the five-power-law regime. A well-defined subgrain substructure is evident and the subgrain walls are ...
Contents
3 | |
13 | |
Chapter 3 DiffusionalCreep | 91 |
Chapter 4 HarperDorn Creep | 99 |
Chapter 5 ThreePowerLaw Viscous Glide Creep | 111 |
Chapter 6 Superplasticity | 123 |
Chapter 7 Recrystallization | 143 |
Chapter 8 Creep Behavior of ParticleStrengthened Alloys | 151 |
Chapter 9 Creep of Intermetallics | 173 |
Chapter 10 Creep Fracture | 215 |
References | 243 |
Index | 269 |