Solid State Behavior of Linear Polyesters and Polyamides |
From inside the book
Results 1-3 of 9
Page 288
... FCP behavior are more relevant than the endurance limit [ established by plotting cyclic stress against number of cycles ( N ) ] . The former approach , based on fracture mechanics , produces matrix aggressive medium applied stress ...
... FCP behavior are more relevant than the endurance limit [ established by plotting cyclic stress against number of cycles ( N ) ] . The former approach , based on fracture mechanics , produces matrix aggressive medium applied stress ...
Page 304
... FCP curves of GF- and CF - reinforced PA - 6.6 composites . [ 52,143 ] ) . This can be attributed both to an increase in VF and better " wetting " of the CF by the matrix ( due to nucleation sites on the CF surface , different thermal ...
... FCP curves of GF- and CF - reinforced PA - 6.6 composites . [ 52,143 ] ) . This can be attributed both to an increase in VF and better " wetting " of the CF by the matrix ( due to nucleation sites on the CF surface , different thermal ...
Page 314
... FCP behavior both of unfilled and reinforced thermoplastics depends pri- marily on whether the effect of crack tip blunting is compensated or not with that of the elastic modulus . Crack tip blunting due to plasticization , impact ...
... FCP behavior both of unfilled and reinforced thermoplastics depends pri- marily on whether the effect of crack tip blunting is compensated or not with that of the elastic modulus . Crack tip blunting due to plasticization , impact ...
Contents
SOLID STATE REACTIONS IN LINEAR | 1 |
TRANSREACTIONS AND POSTADDITIONAL | 19 |
CHEMICAL HEALING | 43 |
Copyright | |
21 other sections not shown
Other editions - View all
Common terms and phrases
acid additional solid amorphous annealing Appl aspect ratio behavior birefringence block temperature chain Chem chemical healing composites copolyester copolymer courtesy crystallinity crystallization curves decreases deformation degree of crystallinity density diameter diffusion domains effect Equation exchange reactions extrusion temperature Fakirov fiber axis fibers drawn filament fracture mechanics fracture toughness function heat of fusion heated element higher increasing initial kg/cm² kinetics linear polycondensates macromolecules Makromol material matrix maximum measurements mechanical melting point microfibrils microstructure mm/min modulus molding molecules morphology nominal draw ratio noncrystalline nylon 6 fibers nylon 66 orientation parameters peak PET fibers phase Phys polyamides polyesters Polymer Sci polymerization properties Reprinted from Ref samples SAXS Schultz semicrystalline shown in Figure solid state polycondensation solid state post-polycondensation solid state reactions Solid-state extrusion specimen spherulite strength stress structure Table tensile terephthalate thermoplastics toughened transesterification transreactions values x-ray yield Zachmann