## Mechanical metallurgy |

### From inside the book

Results 1-3 of 47

Page 557

22-4.

transformed into a curved length. The definitions of the terms used in

illustrated in Fig. 22-8. The bend radius R is defined as the radius of curvature on

the ...

22-4.

**Bending Bending**is the process by which a straight length of metal istransformed into a curved length. The definitions of the terms used in

**bending**areillustrated in Fig. 22-8. The bend radius R is defined as the radius of curvature on

the ...

Page 558

strain, and most experimental data on

The elementary theory of the

circumferential strain, which is considered to vary only in the direction

perpendicular ...

strain, and most experimental data on

**bending**are concerned with this strain.The elementary theory of the

**bending**of rectangular beams considers only thecircumferential strain, which is considered to vary only in the direction

perpendicular ...

Page 590

Show that increasing the size of a fatigue specimen tested in

the stress gradient. 1 2-4. Eckert2 found that the cold straightening of steel axles

had no effect on the torsional fatigue strength but that this procedure could ...

Show that increasing the size of a fatigue specimen tested in

**bending**decreasesthe stress gradient. 1 2-4. Eckert2 found that the cold straightening of steel axles

had no effect on the torsional fatigue strength but that this procedure could ...

### What people are saying - Write a review

We haven't found any reviews in the usual places.

### Contents

Introduction | 3 |

Stress and Strain Relationships for Elastic Behavior | 17 |

Elements of the Theory of Plasticity | 54 |

Copyright | |

21 other sections not shown

### Other editions - View all

### Common terms and phrases

alloys angle annealing ASTM axis behavior bending billet brittle fracture Burgers vector cent compressive constant crack creep rate cycles decrease determined diameter direction dislocation line distribution drawing ductile edge dislocation effect elastic equation extrusion factor failure fatigue limit flow curve flow stress force forging forming friction given grain boundaries hardness high-temperature increase indentation lattice length load longitudinal mandrel martensite material maximum measured mechanical metallurgical Metals Park method modulus notch obtained occurs orientation particles plastic deformation pressure principal stresses Proc produced properties punch quenched radius ratio region relationship residual stresses rolling screw dislocations shear stress sheet shown in Fig shows single crystals slip plane Society for Metals specimen steel strain energy strain hardening strain rate stress-strain curve structure surface temper tensile strength tensile stress tension theory thickness tion torsion Trans transition temperature tube usually yield strength yield stress