## Introduction to Mechanics of Deformable Solids |

### From inside the book

Results 1-3 of 93

Page 25

Excessive plastic

although the structure may no longer be usable . A ratio of failure , or plastic

collapse load , to working load in the neighborhood of 2 is not unreasonable for

quasi ...

Excessive plastic

**deformation**is unpleasant but generally not catastrophic ,although the structure may no longer be usable . A ratio of failure , or plastic

collapse load , to working load in the neighborhood of 2 is not unreasonable for

quasi ...

Page 44

upon the operating conditions . When time effects are pronounced so that a time -

dependent idealization is needed , failure normally will mean excessive ...

**Deformation**and fracture will be more or will be less time - sensitive dependingupon the operating conditions . When time effects are pronounced so that a time -

dependent idealization is needed , failure normally will mean excessive ...

Page 98

Therefore , 87 + 88 + 8y = 0 is the condition of

apart a distance A , the zero on the right - hand side is replaced by A . If the

supports move together a distance A , the zero is replaced by – A . Expressing

the ...

Therefore , 87 + 88 + 8y = 0 is the condition of

**deformation**. If the supports moveapart a distance A , the zero on the right - hand side is replaced by A . If the

supports move together a distance A , the zero is replaced by – A . Expressing

the ...

### What people are saying - Write a review

We haven't found any reviews in the usual places.

### Other editions - View all

### Common terms and phrases

acts actual addition angle answer applied assemblage axial axis beam behavior bending carry circle circular column combined compatibility components compression compressive stress Consider constant creep cross section curve deflection deformation determined diameter dimensions direction displacement effect elastic equal equation example Figure Find force given gives homogeneous idealization increase independent initial interior isotropic length limit linear linear-elastic load material maximum Maxwell modulus moment needed nonlinear normal obtained outer plane plastic positive pressure principal Prob problem produced pure radius range ratio relation replaced requires response result rotation shear stress shell shown shows simple sketch solution steel strain stress-strain relations structural Suppose surface symmetry temperature tensile tension thickness thin-walled tube twisting uniform unloading versus viscous yield zero