## Introduction to Mechanics of Deformable Solids |

### From inside the book

Results 1-3 of 89

Page 24

A bar which elongates or shortens too much under

clearances are lost or other critical dimensions ... 6 / WORKING

THE CONCEPT OF FACTOR OF SAFETY A structure must be designed so that it

functions ...

A bar which elongates or shortens too much under

**load**so that neededclearances are lost or other critical dimensions ... 6 / WORKING

**LOADS**ANDTHE CONCEPT OF FACTOR OF SAFETY A structure must be designed so that it

functions ...

Page 25

Most structural design involves far greater uncertainty in

under

under continual reexamination for the important classes of structures and

machines .

Most structural design involves far greater uncertainty in

**load**and in behaviorunder

**load**. The factor of safety to be employed as well as the working**load**isunder continual reexamination for the important classes of structures and

machines .

Page 103

Many design specifications limit the working

for first yield , Ry , say Rw = 17 R RY Continuation of the

causes continued stretching of the tubes . The idealized tube which is yielding is

...

Many design specifications limit the working

**load**Rw to some fraction of the**load**for first yield , Ry , say Rw = 17 R RY Continuation of the

**loading**beyond RYcauses continued stretching of the tubes . The idealized tube which is yielding is

...

### What people are saying - Write a review

We haven't found any reviews in the usual places.

### Other editions - View all

### Common terms and phrases

acts actual addition angle answer applied assemblage axial axis beam behavior bending carry circle circular column combined compatibility components compression compressive stress Consider constant creep cross section curve deflection deformation determined diameter dimensions direction displacement effect elastic equal equation example Figure Find force given gives homogeneous idealization increase independent initial interior isotropic length limit linear linear-elastic load material maximum Maxwell modulus moment needed nonlinear normal obtained outer plane plastic positive pressure principal Prob problem produced pure radius range ratio relation replaced requires response result rotation shear stress shell shown shows simple sketch solution steel strain stress-strain relations structural Suppose surface symmetry temperature tensile tension thickness thin-walled tube twisting uniform unloading versus viscous yield zero