Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 4American Society of Mechanical Engineers, 2001 - Arctic regions |
From inside the book
Results 1-3 of 64
Page 131
... applied by a jack , and internal pressure was applied by the fluid pump . A similar setup but without any jack and loading arm was used for axial specimens . The force in the jack allowed moment to be applied to the end of the specimen ...
... applied by a jack , and internal pressure was applied by the fluid pump . A similar setup but without any jack and loading arm was used for axial specimens . The force in the jack allowed moment to be applied to the end of the specimen ...
Page 141
... applied to the vessel CoM and therefore any amplification of motion at the rollers is simulated . The analysis is performed in three main load steps ( Figure4 ) . Model Load Steps ROLLER 2 ROLLER 3 PNOT PIN CENTROID ROLLER 4 ROLLER 5 ...
... applied to the vessel CoM and therefore any amplification of motion at the rollers is simulated . The analysis is performed in three main load steps ( Figure4 ) . Model Load Steps ROLLER 2 ROLLER 3 PNOT PIN CENTROID ROLLER 4 ROLLER 5 ...
Page 260
Applied Force / Specimen Weigh 3 2 . 0 -2 0 2 Imposed Displacement / Specimen Diameter -AL - 0 N AL - 7.7 kN AL 29.4 kN Figure 8- Comparison between Results Obtained through Quasi - static Tests for no Internal Pressure Applied Force ...
Applied Force / Specimen Weigh 3 2 . 0 -2 0 2 Imposed Displacement / Specimen Diameter -AL - 0 N AL - 7.7 kN AL 29.4 kN Figure 8- Comparison between Results Obtained through Quasi - static Tests for no Internal Pressure Applied Force ...
Other editions - View all
Common terms and phrases
accretion analysis annulus Arctic Engineering Arctic Ocean axial loading behavior bending stiffness Bohai buckle arrestor cable calculated carrier pipe catenary coefficient collapse compressive Conference on Offshore configuration corrosion crack damping ratio deepwater defect deformation Det Norske Veritas developed diameter displacement dynamic elastic experimental failure pressures Figure finite element finite element analysis flexible pipe flowline fluid fracture freespans gauge grooves heat transfer heat transfer coefficient hummocks ice force ice load ice sheet increase installation insulation internal pressure layer length liner maximum Mechanics and Arctic method Offshore Mechanics operation parameters PETROBRAS phase pipeline pipeline system plastic predicted ratio reeling Rio de Janeiro riser system risk sagging sand scour sea ice seabed shear stress simulation soil specimens stamukhas steel strain strain gauges stress structure subsea surface temperature tension tests thermal thickness titanium values velocity water depth weld wrinkle