## Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 11, Part 3American Society of Mechanical Engineers, 1992 - Arctic regions |

### From inside the book

Results 1-3 of 75

Page 300

Model tests have been used to

These and other

UEG , 1985 ) . A value for the limit load of the cracked body could be taken from ...

Model tests have been used to

**estimate**the collapse loads of uncracked joints .These and other

**estimates**have lead to formulae proposed by DnV and API (UEG , 1985 ) . A value for the limit load of the cracked body could be taken from ...

Page 374

5 assuming that the mean value of each distribution is the

Considering that the abscissae of Figs . 6 and 7 express only the precision error ,

the new technique proposed is found to have great possibility to boost the

reliability in ...

5 assuming that the mean value of each distribution is the

**estimate**F / A ,Considering that the abscissae of Figs . 6 and 7 express only the precision error ,

the new technique proposed is found to have great possibility to boost the

reliability in ...

Page 375

The error of

) th tightening torque are used for the

in Fig . 9 ) . 20 MoS2 paste lub . Total error er % 20 Machine oil lub .

The error of

**estimate**would be much larger , if the ith loosening torque and ( i + 1) th tightening torque are used for the

**estimation**by eq ( 6 ) ( plots marked and 0in Fig . 9 ) . 20 MoS2 paste lub . Total error er % 20 Machine oil lub .

### What people are saying - Write a review

We haven't found any reviews in the usual places.

### Contents

ADVANCES IN STEEL AND WELDING | 65 |

Kapadia Y Adonyi J D Defilippi and W F Domis | 73 |

ThroughThickness Properties of TMCP Steels | 81 |

Copyright | |

20 other sections not shown

### Other editions - View all

### Common terms and phrases

analysis applied assessment axial base base metal bending bolt calculated carried chord combined compared complete composite compression concentration considered constant corrosion crack growth curve cycles damage defects depth determined diameter distribution edge effect elastic elements energy Engineering equations estimate experimental failure fatigue crack Figure fracture function geometry hardness heat higher hydrogen increase initial interaction International limit load material mean measured mechanical method mode observed obtained occur Offshore parameters performed pipe plastic plate predictions present pressure probability problems procedure produced properties range ratio reduced reference region Research shown shows solution specimens steel stiffness strain stress intensity factors structures subjected surface Table technique temperature tensile tension thickness thread toughness tubular joints values weld metal yield strength