Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 13, Parts 3-5American Society of Mechanical Engineers, 1994 - Arctic regions |
From inside the book
Results 1-3 of 100
Page 74
Since the fatigue data are obtained on test pieces , the information may not exactly apply to an actual structure being considered . some studies have revealed that “ intrusions " and “ extrusion ” precede fatigue crack initiation .
Since the fatigue data are obtained on test pieces , the information may not exactly apply to an actual structure being considered . some studies have revealed that “ intrusions " and “ extrusion ” precede fatigue crack initiation .
Page 156
The fracture surface observation of the notched round - bar specimens which failed in the corrosion fatigue life test in the sour crude oil much shorter than in air , revealed that the fatigue crack initiated at the notch .
The fracture surface observation of the notched round - bar specimens which failed in the corrosion fatigue life test in the sour crude oil much shorter than in air , revealed that the fatigue crack initiated at the notch .
Page 158
Stage 2 : The crack opening increases with associating with fatigue crack propagation , causing the corrosion product itself to crack . Consequently sour crude oil gradually reaches the newly formed fatigue crack tip , allowing da / dN ...
Stage 2 : The crack opening increases with associating with fatigue crack propagation , causing the corrosion product itself to crack . Consequently sour crude oil gradually reaches the newly formed fatigue crack tip , allowing da / dN ...
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
FATIGUE AND DEFORMATION | 1 |
Determination of Recovery Length in Spiral Strands | 9 |
FRACTURE ASSESSMENT AND ANALYSIS | 37 |
Copyright | |
36 other sections not shown
Other editions - View all
Common terms and phrases
analysis applied assessment bending calculated compared composition constant corrosion crack growth CTOD curve cycles deformation dependence deposit depth determined developed distribution effect elastic electrode Engineering environment equation experimental factor failure fatigue crack ferrite Figure finite element fracture geometry given grain heat higher hydrogen increase indicate initial International joints length limit load lower material mean measured Mechanics method microstructure nitrogen notch observed obtained occur Offshore operating oxygen parameters performed phase pipe plastic plate predictions present pressure problems procedure produced propagation properties protection range ratio reduced region Research residual respectively sea water shown shows simulated specimens standard steel strain strength stress structures surface Table temperature tensile thickness toughness tubular joints values weld metal wire yield
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 13, Parts 3-5 |
| Contributors | OMAE Conference Committee, American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division, American Society of Mechanical Engineers |
| Publisher | American Society of Mechanical Engineers, 1994 |
| Original from | the University of Michigan |
| Digitized | 4 Dec 2007 |
| ISBN | 0791812669, 9780791812662 |
| Export Citation | BiBTeX EndNote RefMan |