Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 13, Parts 3-5American Society of Mechanical Engineers, 1994 - Arctic regions |
From inside the book
Results 1-3 of 76
Page 14
... present in the plots in figure 5 which use the lay angle ( as opposed to the pitch ) as the primary controlling parameter . In view of the relatively small degree of scatter present in Figure 5 , it may reasonably be concluded that the ...
... present in the plots in figure 5 which use the lay angle ( as opposed to the pitch ) as the primary controlling parameter . In view of the relatively small degree of scatter present in Figure 5 , it may reasonably be concluded that the ...
Page 182
... present specimens 15 % higher on average than the method in the UK Guidance . However , for consistency the UK prescribed method has been adopted in the present study . Strains measured on the internal and external surfaces of the chord ...
... present specimens 15 % higher on average than the method in the UK Guidance . However , for consistency the UK prescribed method has been adopted in the present study . Strains measured on the internal and external surfaces of the chord ...
Page 317
... present work forms a part of this joint research project and refers to the investigation on cold deformation and respective fracture characteristics of the 20 mm thick 450 YS TMCP steel only . EXPERIMENTAL PROCEDURE Material , cold ...
... present work forms a part of this joint research project and refers to the investigation on cold deformation and respective fracture characteristics of the 20 mm thick 450 YS TMCP steel only . EXPERIMENTAL PROCEDURE Material , cold ...
Contents
FATIGUE AND DEFORMATION | 1 |
FRACTURE ASSESSMENT AND ANALYSIS | 37 |
FATIGUE DESIGN AND DETECTION | 73 |
Copyright | |
45 other sections not shown
Other editions - View all
Common terms and phrases
analysis applied Arctic Engineering as-welded ASME assessment axial bending cathodic protection Charpy cold deformation corrosion crack growth rate crack propagation crack tip CTOD cycles depth diameter displacement drillpipe elastic electrode equation experimental factor failure fatigue crack growth fatigue strength ferrite finite element fracture mechanics fracture toughness geometry hoop stress hydrogen Ice Class increase load material maximum mbar Mechanics and Arctic method microstructure modulus nitrogen notch obtained Offshore Mechanics offshore structures OMAE operating oxygen parameters pipe pipeline plastic predicted pressure properties ratio region residual stress S-N curve scour sea ice sea water shear shielding gas simulated soil sour crude oil specimens strain rate stress intensity stress range stress relieved surface Table temperature tensile TMCP tubular joints values wall thickness water hammer weld deposit weld metal weld toe welded joints wire yield strength Young's modulus