Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 13, Parts 3-5American Society of Mechanical Engineers, 1994 - Arctic regions |
From inside the book
Results 1-3 of 95
Page 85
... range , measured with a strain gage placed adjacent to the weld toe , was plotted with the number of cycles to through - thickness cracking . In some experiments , a membrane stress range was also applied in the direction perpendicular ...
... range , measured with a strain gage placed adjacent to the weld toe , was plotted with the number of cycles to through - thickness cracking . In some experiments , a membrane stress range was also applied in the direction perpendicular ...
Page 89
... range of 55 MPa and those with a direct stress range of 110 MPa , it is clear that the data associated with the lower direct stress range scatter out to the longer lives . Therefore , there is a noticeable effect of decreasing fatigue ...
... range of 55 MPa and those with a direct stress range of 110 MPa , it is clear that the data associated with the lower direct stress range scatter out to the longer lives . Therefore , there is a noticeable effect of decreasing fatigue ...
Page 271
... range . The tide data recorded at Norderney from 1891 to 1990 has been analyzed for this study to investigate the local variations in the increase in tidal range and to provide a value of the increase in tidal range over the next 50 ...
... range . The tide data recorded at Norderney from 1891 to 1990 has been analyzed for this study to investigate the local variations in the increase in tidal range and to provide a value of the increase in tidal range over the next 50 ...
Contents
FATIGUE AND DEFORMATION | 1 |
FRACTURE ASSESSMENT AND ANALYSIS | 37 |
FATIGUE DESIGN AND DETECTION | 73 |
Copyright | |
45 other sections not shown
Other editions - View all
Common terms and phrases
analysis applied Arctic Engineering as-welded ASME assessment axial bending cathodic protection Charpy cold deformation corrosion crack growth rate crack propagation crack tip CTOD cycles depth diameter displacement drillpipe elastic electrode equation experimental factor failure fatigue crack growth fatigue strength ferrite finite element fracture mechanics fracture toughness geometry hoop stress hydrogen Ice Class increase load material maximum mbar Mechanics and Arctic method microstructure modulus nitrogen notch obtained Offshore Mechanics offshore structures OMAE operating oxygen parameters pipe pipeline plastic predicted pressure properties ratio region residual stress S-N curve scour sea ice sea water shear shielding gas simulated soil sour crude oil specimens strain rate stress intensity stress range stress relieved surface Table temperature tensile TMCP tubular joints values wall thickness water hammer weld deposit weld metal weld toe welded joints wire yield strength Young's modulus