Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 13, Parts 3-5American Society of Mechanical Engineers, 1994 - Arctic regions |
From inside the book
Results 1-3 of 98
Page 328
with OP121TT fully basic submerged arc welding flux . For manual metal arc welding these properties are achieved by the use of E7018 - G electrodes containing additions of 1-2 % nickel ( Taylor ... weld metal . The toughness of the re - 328.
with OP121TT fully basic submerged arc welding flux . For manual metal arc welding these properties are achieved by the use of E7018 - G electrodes containing additions of 1-2 % nickel ( Taylor ... weld metal . The toughness of the re - 328.
Page 329
deposited weld metal . The toughness of the re - heated weld metal increased slightly following post weld heat treatment . For as deposited weld metal , the impact toughness increased as the nitrogen content in the weld metal decreased ...
deposited weld metal . The toughness of the re - heated weld metal increased slightly following post weld heat treatment . For as deposited weld metal , the impact toughness increased as the nitrogen content in the weld metal decreased ...
Page 330
... weld deposit improved by reducing the nitrogen content and this effect was more pronounced for as deposited than for re - heated weld metal . The lower toughness of the as deposited weld metal can be attributed to the angular morphology ...
... weld deposit improved by reducing the nitrogen content and this effect was more pronounced for as deposited than for re - heated weld metal . The lower toughness of the as deposited weld metal can be attributed to the angular morphology ...
Contents
FATIGUE AND DEFORMATION | 1 |
FRACTURE ASSESSMENT AND ANALYSIS | 37 |
FATIGUE DESIGN AND DETECTION | 73 |
Copyright | |
45 other sections not shown
Other editions - View all
Common terms and phrases
analysis applied Arctic Engineering as-welded ASME assessment axial bending cathodic protection Charpy cold deformation corrosion crack growth rate crack propagation crack tip CTOD cycles depth diameter displacement drillpipe elastic electrode equation experimental factor failure fatigue crack growth fatigue strength ferrite finite element fracture mechanics fracture toughness geometry hoop stress hydrogen Ice Class increase load material maximum mbar Mechanics and Arctic method microstructure modulus nitrogen notch obtained Offshore Mechanics offshore structures OMAE operating oxygen parameters pipe pipeline plastic predicted pressure properties ratio region residual stress S-N curve scour sea ice sea water shear shielding gas simulated soil sour crude oil specimens strain rate stress intensity stress range stress relieved surface Table temperature tensile TMCP tubular joints values wall thickness water hammer weld deposit weld metal weld toe welded joints wire yield strength Young's modulus