Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 87
Page 123
... Charpy and CTOD values by plotting minimum single mid - thickness CGZ Charpy results against minimum single CTOD values , but no correlation was established . In practice , correlation between Charpy and CTOD data is only possible if ...
... Charpy and CTOD values by plotting minimum single mid - thickness CGZ Charpy results against minimum single CTOD values , but no correlation was established . In practice , correlation between Charpy and CTOD data is only possible if ...
Page 124
... Charpy values of less than 100J at -40 ° C . Examining the HAZ Charpy results for these plates shows that they had generally poorer toughness in the welded condition than the normal toughness plates . Relationship Toughness Between ...
... Charpy values of less than 100J at -40 ° C . Examining the HAZ Charpy results for these plates shows that they had generally poorer toughness in the welded condition than the normal toughness plates . Relationship Toughness Between ...
Page 188
... Charpy - V - fracture toughness test results . Charpy- v - toughness at + 40 ° c Charpy - v- toughness at + 40 ° c NUMBER OF SPECIMENS Welding procedure qualification results ( -40 ° C ) Spec . 45 32 24- 16 8- 0 NUMBER OF SPECIMENS Spec ...
... Charpy - V - fracture toughness test results . Charpy- v - toughness at + 40 ° c Charpy - v- toughness at + 40 ° c NUMBER OF SPECIMENS Welding procedure qualification results ( -40 ° C ) Spec . 45 32 24- 16 8- 0 NUMBER OF SPECIMENS Spec ...
Contents
ADVANCED COMPOSITES | 1 |
PAS2m High Performance Prepreg and Composites | 9 |
OFFSHORE TECHNOLOGY GEOTECHNICAL ENGINEERING | 24 |
Copyright | |
39 other sections not shown
Other editions - View all
Common terms and phrases
abrasion accelerated cooled analysis as-welded austenite axial boron brace brittle fracture CGHAZ Charpy Charpy-V chemical composition chord coarse grained concrete Conference on Offshore crack tip CSM CSM CTOD tests CTOD values curves defect dislocations effect electron beam welding fabrication ferrite fiber Figure finite element fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen cracking ICCGHAZ impact increase kJ/mm layup loading low carbon martensite maximum mechanical properties Mechanics and Arctic mid-thickness niobium notch Offshore Mechanics offshore structures Oseberg parameters plastic post weld heat preheat PWHT regions residual stresses sampled solidification cracking specification specimens steel plates stiffeners strain stress concentration stress intensity factor submerged arc welding surface Table temperature tensile test results TMCP transverse tubular joints weld heat treatment weld metal weld toe weldability welded joints welding procedures weldment yield strength