Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 39
Page 81
... chord intersection under the above mentioned brace forces using a finite element analysis program TUJAP . Figures 4 and 5 show the SCF distributions along the chord side weld toe and through the chord wall at the 9 o'clock position ...
... chord intersection under the above mentioned brace forces using a finite element analysis program TUJAP . Figures 4 and 5 show the SCF distributions along the chord side weld toe and through the chord wall at the 9 o'clock position ...
Page 158
... chord and assuming that the end sections of the chord were free to deform in their planes or had these deformations prevented by the existence of rigid diaphragms . The chord length used in the experiments conducted at The University of ...
... chord and assuming that the end sections of the chord were free to deform in their planes or had these deformations prevented by the existence of rigid diaphragms . The chord length used in the experiments conducted at The University of ...
Page 159
... chord length had at the final loading stage a horizontal diameter of 18.587 inches and a vertical diameter of 13.756 inches at the central section and values of 17.873 and 13.317 inches at the end sections , deforming basically in a ...
... chord length had at the final loading stage a horizontal diameter of 18.587 inches and a vertical diameter of 13.756 inches at the central section and values of 17.873 and 13.317 inches at the end sections , deforming basically in a ...
Contents
ADVANCED COMPOSITES | 1 |
PAS2tm | 9 |
OFFSHORE TECHNOLOGY GEOTECHNICAL ENGINEERING | 24 |
Copyright | |
39 other sections not shown
Other editions - View all
Common terms and phrases
abrasion accelerated cooled analysis as-welded assessment austenite axial boron brace brittle fracture CGHAZ Charpy Charpy-V chemical composition chord coarse grained concrete Conference on Offshore crack tip CTOD tests CTOD values curves defect dislocations effect energy fabrication ferrite fiber Figure finite element fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen cracking ICCGHAZ impact increase intercritically kJ/mm layup loading low carbon martensite maximum mechanical properties Mechanics and Arctic mid-thickness niobium notch Offshore Mechanics offshore structures Oseberg parameters plastic post weld heat preheat pressure PWHT regions residual stresses sampled solidification cracking specification specimens steel plates stiffeners strain stress concentration stress intensity factor submerged arc welding surface Table temperature tensile test results TMCP transverse tubular joints weld heat treatment weld metal weld toe weldability welded joints welding procedures weldment yield strength