Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 84
Page 226
... depth of carbonation in situ , a 3 % solution of phenolphthalein was used . The depth of erosion on the caisson wall has been checked by measuring the distance between straight- edges placed on concrete surfaces above and beneath the ...
... depth of carbonation in situ , a 3 % solution of phenolphthalein was used . The depth of erosion on the caisson wall has been checked by measuring the distance between straight- edges placed on concrete surfaces above and beneath the ...
Page 439
... depth ( mm ) 0.00 4.00 0.000 8.00 12.00 16.00 xx *** +++ ++ --- FIGURE 6a CRACK GROWTH IN KOPB - 1 D - LEGEND- + ... DEPTH ) + Data points in load step down ( to 90 % ) test Data points for leading crack depth 0.4 0.8 1.2 FIGURE 6b CRACK ...
... depth ( mm ) 0.00 4.00 0.000 8.00 12.00 16.00 xx *** +++ ++ --- FIGURE 6a CRACK GROWTH IN KOPB - 1 D - LEGEND- + ... DEPTH ) + Data points in load step down ( to 90 % ) test Data points for leading crack depth 0.4 0.8 1.2 FIGURE 6b CRACK ...
Page 453
... depth ( ag ) when a dominant irregular crack has developed . @D , CRACK DEPTH ( mm ) 20 16 2 50 OOD . 8 WATERLOO T ( mm ) ୮ CANMET 16- 26 52 - A Δ 78 103 OD - - 200 100 150 STRESS RANGE ( MPa ) 250 300 Figure 12 : Maximum crack depth ...
... depth ( ag ) when a dominant irregular crack has developed . @D , CRACK DEPTH ( mm ) 20 16 2 50 OOD . 8 WATERLOO T ( mm ) ୮ CANMET 16- 26 52 - A Δ 78 103 OD - - 200 100 150 STRESS RANGE ( MPa ) 250 300 Figure 12 : Maximum crack depth ...
Contents
ADVANCED COMPOSITES | 1 |
PAS2m High Performance Prepreg and Composites | 9 |
OFFSHORE TECHNOLOGY GEOTECHNICAL ENGINEERING | 24 |
Copyright | |
39 other sections not shown
Other editions - View all
Common terms and phrases
abrasion accelerated cooled analysis as-welded austenite axial boron brace brittle fracture CGHAZ Charpy Charpy-V chemical composition chord coarse grained concrete Conference on Offshore crack tip CSM CSM CTOD tests CTOD values curves defect dislocations effect electron beam welding fabrication ferrite fiber Figure finite element fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen cracking ICCGHAZ impact increase kJ/mm layup loading low carbon martensite maximum mechanical properties Mechanics and Arctic mid-thickness niobium notch Offshore Mechanics offshore structures Oseberg parameters plastic post weld heat preheat PWHT regions residual stresses sampled solidification cracking specification specimens steel plates stiffeners strain stress concentration stress intensity factor submerged arc welding surface Table temperature tensile test results TMCP transverse tubular joints weld heat treatment weld metal weld toe weldability welded joints welding procedures weldment yield strength