Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 83
Page 128
... direction aligned with y , the transverse direction to the weld in the plane of the plate , and a [ 110 ] direction aligned with z , parallel to the weld . The T - weld weighed 30 kg and the weld was 35 cm long . SCATTERED BEAM ( c ) Z ...
... direction aligned with y , the transverse direction to the weld in the plane of the plate , and a [ 110 ] direction aligned with z , parallel to the weld . The T - weld weighed 30 kg and the weld was 35 cm long . SCATTERED BEAM ( c ) Z ...
Page 130
... direction is 219 GPa while its value for the [ 002 ] direction is 131 GPa . As mentioned above , the T - weld was made from a rolled plate for which the grain orientation was weighted in favour of the ideal grain orientation . In the ...
... direction is 219 GPa while its value for the [ 002 ] direction is 131 GPa . As mentioned above , the T - weld was made from a rolled plate for which the grain orientation was weighted in favour of the ideal grain orientation . In the ...
Page 540
... Direction on SCC Resistance The effect of microstructural variation caused by 10-91 5 10 15 KI ( MPa vm ) Fig.7 Subcritical crack growth velocity in GTA and GMA weld metals compared with that in base metal in transverse direction ...
... Direction on SCC Resistance The effect of microstructural variation caused by 10-91 5 10 15 KI ( MPa vm ) Fig.7 Subcritical crack growth velocity in GTA and GMA weld metals compared with that in base metal in transverse direction ...
Contents
ADVANCED COMPOSITES | 1 |
PAS2m High Performance Prepreg and Composites | 9 |
OFFSHORE TECHNOLOGY GEOTECHNICAL ENGINEERING | 24 |
Copyright | |
39 other sections not shown
Other editions - View all
Common terms and phrases
abrasion accelerated cooled analysis as-welded austenite axial boron brace brittle fracture CGHAZ Charpy Charpy-V chemical composition chord coarse grained concrete Conference on Offshore crack tip CSM CSM CTOD tests CTOD values curves defect dislocations effect electron beam welding fabrication ferrite fiber Figure finite element fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen cracking ICCGHAZ impact increase kJ/mm layup loading low carbon martensite maximum mechanical properties Mechanics and Arctic mid-thickness niobium notch Offshore Mechanics offshore structures Oseberg parameters plastic post weld heat preheat PWHT regions residual stresses sampled solidification cracking specification specimens steel plates stiffeners strain stress concentration stress intensity factor submerged arc welding surface Table temperature tensile test results TMCP transverse tubular joints weld heat treatment weld metal weld toe weldability welded joints welding procedures weldment yield strength