Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 83
Page 158
... length that should be used to obtain values independent of the boundary conditions . Experiments conducted with very small chord lengths will yield results very different from those obtained with chord lengths above the minimum and a ...
... length that should be used to obtain values independent of the boundary conditions . Experiments conducted with very small chord lengths will yield results very different from those obtained with chord lengths above the minimum and a ...
Page 362
... length , and S is the uniformly applied far - field stress . The stress intensity factor for a crack in a finite geometry can be written in the following general form : K = BK ( 6 ) where B is called the total correction factor and is a ...
... length , and S is the uniformly applied far - field stress . The stress intensity factor for a crack in a finite geometry can be written in the following general form : K = BK ( 6 ) where B is called the total correction factor and is a ...
Page 401
... length . - 22 mm in weld metal adjacent to coarse grain . WP3 - No fatigue crack in coarse grain HAZ . - 130 mm ( 90 ... length . - 40 mm in 50-100 μm HAZ . WP9 - 80 mm in 100 μm HAZ , 60 % of total crack length . - 25 mm in 50-100 μm ...
... length . - 22 mm in weld metal adjacent to coarse grain . WP3 - No fatigue crack in coarse grain HAZ . - 130 mm ( 90 ... length . - 40 mm in 50-100 μm HAZ . WP9 - 80 mm in 100 μm HAZ , 60 % of total crack length . - 25 mm in 50-100 μm ...
Contents
ADVANCED COMPOSITES | 1 |
PAS2m High Performance Prepreg and Composites | 9 |
OFFSHORE TECHNOLOGY GEOTECHNICAL ENGINEERING | 24 |
Copyright | |
39 other sections not shown
Other editions - View all
Common terms and phrases
abrasion accelerated cooled analysis as-welded austenite axial boron brace brittle fracture CGHAZ Charpy Charpy-V chemical composition chord coarse grained concrete Conference on Offshore crack tip CSM CSM CTOD tests CTOD values curves defect dislocations effect electron beam welding fabrication ferrite fiber Figure finite element fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen cracking ICCGHAZ impact increase kJ/mm layup loading low carbon martensite maximum mechanical properties Mechanics and Arctic mid-thickness niobium notch Offshore Mechanics offshore structures Oseberg parameters plastic post weld heat preheat PWHT regions residual stresses sampled solidification cracking specification specimens steel plates stiffeners strain stress concentration stress intensity factor submerged arc welding surface Table temperature tensile test results TMCP transverse tubular joints weld heat treatment weld metal weld toe weldability welded joints welding procedures weldment yield strength