Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 85
Page 15
... maximum value of this pressure occurs at the saddle horn . As a first approximation to the complete analysis of a multi - layered vessel on saddle supports , it is possible to consider the radial interface load at the horn in isolation ...
... maximum value of this pressure occurs at the saddle horn . As a first approximation to the complete analysis of a multi - layered vessel on saddle supports , it is possible to consider the radial interface load at the horn in isolation ...
Page 17
... MAXIMUM | MAXIMUM MAXIMUM 06 106 AXIAL STRAIN CIRC . STRAIN AXIAL STRESS CIRC . STRESS ↑ CR ECR OCR OCR 0.51 105 Maximum 0.4 104 S1 0.042 -0.818 - 1.773 -0.158 -0.233 Stress Criterion S2 ( a ) 0.113 -0.356 -0.769 0.092 0.336 031 10.3 ...
... MAXIMUM | MAXIMUM MAXIMUM 06 106 AXIAL STRAIN CIRC . STRAIN AXIAL STRESS CIRC . STRESS ↑ CR ECR OCR OCR 0.51 105 Maximum 0.4 104 S1 0.042 -0.818 - 1.773 -0.158 -0.233 Stress Criterion S2 ( a ) 0.113 -0.356 -0.769 0.092 0.336 031 10.3 ...
Page 71
... maximum allowable defect size . Maximum utilized stress . The fracture mechanics strength criteria can be applied in the derivation of the maximum tolerable stress at a given cross section . This figure is obtained when the materials ...
... maximum allowable defect size . Maximum utilized stress . The fracture mechanics strength criteria can be applied in the derivation of the maximum tolerable stress at a given cross section . This figure is obtained when the materials ...
Contents
ADVANCED COMPOSITES | 1 |
PAS2tm | 9 |
OFFSHORE TECHNOLOGY GEOTECHNICAL ENGINEERING | 24 |
Copyright | |
39 other sections not shown
Other editions - View all
Common terms and phrases
abrasion accelerated cooled analysis as-welded assessment austenite axial boron brace brittle fracture CGHAZ Charpy Charpy-V chemical composition chord coarse grained concrete Conference on Offshore crack tip CTOD tests CTOD values curves defect dislocations effect energy fabrication ferrite fiber Figure finite element fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen cracking ICCGHAZ impact increase intercritically kJ/mm layup loading low carbon martensite maximum mechanical properties Mechanics and Arctic mid-thickness niobium notch Offshore Mechanics offshore structures Oseberg parameters plastic post weld heat preheat pressure PWHT regions residual stresses sampled solidification cracking specification specimens steel plates stiffeners strain stress concentration stress intensity factor submerged arc welding surface Table temperature tensile test results TMCP transverse tubular joints weld heat treatment weld metal weld toe weldability welded joints welding procedures weldment yield strength