Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 78
Page 129
... measured with both reflections . = In order to derive strains from measured inter- planar spacings a reference spacing must be obtained . An average lattice parameter was computed from all the measured spacings in all three directions ...
... measured with both reflections . = In order to derive strains from measured inter- planar spacings a reference spacing must be obtained . An average lattice parameter was computed from all the measured spacings in all three directions ...
Page 130
... measured . This process , conventionally used for X - ray stress analysis where the set of ( hkl ) planes is often not aligned with the ideal texture , yields effec- tive elastic constants for translating effects in one set of grains to ...
... measured . This process , conventionally used for X - ray stress analysis where the set of ( hkl ) planes is often not aligned with the ideal texture , yields effec- tive elastic constants for translating effects in one set of grains to ...
Page 261
... measured CTOD value were the location of the fatigue crack tip relative to the fusion line and the microstructure adjacent to and slightly ahead of the crack tip . Consideration of the detailed results demonstrates the sensitivity of ...
... measured CTOD value were the location of the fatigue crack tip relative to the fusion line and the microstructure adjacent to and slightly ahead of the crack tip . Consideration of the detailed results demonstrates the sensitivity of ...
Contents
ADVANCED COMPOSITES | 1 |
PAS2m High Performance Prepreg and Composites | 9 |
OFFSHORE TECHNOLOGY GEOTECHNICAL ENGINEERING | 24 |
Copyright | |
39 other sections not shown
Other editions - View all
Common terms and phrases
abrasion accelerated cooled analysis as-welded austenite axial boron brace brittle fracture CGHAZ Charpy Charpy-V chemical composition chord coarse grained concrete Conference on Offshore crack tip CSM CSM CTOD tests CTOD values curves defect dislocations effect electron beam welding fabrication ferrite fiber Figure finite element fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen cracking ICCGHAZ impact increase kJ/mm layup loading low carbon martensite maximum mechanical properties Mechanics and Arctic mid-thickness niobium notch Offshore Mechanics offshore structures Oseberg parameters plastic post weld heat preheat PWHT regions residual stresses sampled solidification cracking specification specimens steel plates stiffeners strain stress concentration stress intensity factor submerged arc welding surface Table temperature tensile test results TMCP transverse tubular joints weld heat treatment weld metal weld toe weldability welded joints welding procedures weldment yield strength