Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 79
Page 193
... range specified accurately reflects the acceptable working range for the steel supplied . Even so , both client and fabricator should be prepared to consider additional testing to prove any departure from this range , if this can be ...
... range specified accurately reflects the acceptable working range for the steel supplied . Even so , both client and fabricator should be prepared to consider additional testing to prove any departure from this range , if this can be ...
Page 451
... RANGE ( MPa ) 4x102 102 T ( mm ) 16 - 26 52 78 103 - WATERLOO CANMET - 4x10 ' 103 104 Figure 6 : 100 80 60 % Np / NT 0 O DA NT TO FINAL FRACTURE 105 NT ( cycles ) 106 107 Hot spot stress range versus total life ( NT ) 40- T ( mm ) ...
... RANGE ( MPa ) 4x102 102 T ( mm ) 16 - 26 52 78 103 - WATERLOO CANMET - 4x10 ' 103 104 Figure 6 : 100 80 60 % Np / NT 0 O DA NT TO FINAL FRACTURE 105 NT ( cycles ) 106 107 Hot spot stress range versus total life ( NT ) 40- T ( mm ) ...
Page 576
... Range Nominal stress range in brace Nominal stress range in brace Punching shear stress range in chord member Punching shear stress range in chord member Hot spot stress or strain range at weld toe Hot spot stress or strain range at ...
... Range Nominal stress range in brace Nominal stress range in brace Punching shear stress range in chord member Punching shear stress range in chord member Hot spot stress or strain range at weld toe Hot spot stress or strain range at ...
Contents
ADVANCED COMPOSITES | 1 |
PAS2tm | 9 |
OFFSHORE TECHNOLOGY GEOTECHNICAL ENGINEERING | 24 |
Copyright | |
39 other sections not shown
Other editions - View all
Common terms and phrases
abrasion accelerated cooled analysis as-welded assessment austenite axial boron brace brittle fracture CGHAZ Charpy Charpy-V chemical composition chord coarse grained concrete Conference on Offshore crack tip CTOD tests CTOD values curves defect dislocations effect energy fabrication ferrite fiber Figure finite element fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen cracking ICCGHAZ impact increase intercritically kJ/mm layup loading low carbon martensite maximum mechanical properties Mechanics and Arctic mid-thickness niobium notch Offshore Mechanics offshore structures Oseberg parameters plastic post weld heat preheat pressure PWHT regions residual stresses sampled solidification cracking specification specimens steel plates stiffeners strain stress concentration stress intensity factor submerged arc welding surface Table temperature tensile test results TMCP transverse tubular joints weld heat treatment weld metal weld toe weldability welded joints welding procedures weldment yield strength