Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 87
Page 111
... reduced as the carbon equivalent decreased although the extent of improvement was less than expected when judged by behaviour based on experience from older steels . It is considered that the main reason for a smaller than expected ...
... reduced as the carbon equivalent decreased although the extent of improvement was less than expected when judged by behaviour based on experience from older steels . It is considered that the main reason for a smaller than expected ...
Page 185
... reduced fracture toughness . The reduced fracture toughness in the coarse grained part of the HAZ is always due to a high portion of coarse grain size and / or coarce grained inter- critically reheated microstructures . The presence of ...
... reduced fracture toughness . The reduced fracture toughness in the coarse grained part of the HAZ is always due to a high portion of coarse grain size and / or coarce grained inter- critically reheated microstructures . The presence of ...
Page 210
... reduced to 6,4 mm over a length of 10 mm to aid in obtaining fracture in the center of the simulat- ed portion . The minimum diameter of the reduced section was measured to the nearest 0,01 mm . Although the base metal tensile specimen ...
... reduced to 6,4 mm over a length of 10 mm to aid in obtaining fracture in the center of the simulat- ed portion . The minimum diameter of the reduced section was measured to the nearest 0,01 mm . Although the base metal tensile specimen ...
Contents
ADVANCED COMPOSITES | 1 |
PAS2m High Performance Prepreg and Composites | 9 |
OFFSHORE TECHNOLOGY GEOTECHNICAL ENGINEERING | 24 |
Copyright | |
39 other sections not shown
Other editions - View all
Common terms and phrases
abrasion accelerated cooled analysis as-welded austenite axial boron brace brittle fracture CGHAZ Charpy Charpy-V chemical composition chord coarse grained concrete Conference on Offshore crack tip CSM CSM CTOD tests CTOD values curves defect dislocations effect electron beam welding fabrication ferrite fiber Figure finite element fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen cracking ICCGHAZ impact increase kJ/mm layup loading low carbon martensite maximum mechanical properties Mechanics and Arctic mid-thickness niobium notch Offshore Mechanics offshore structures Oseberg parameters plastic post weld heat preheat PWHT regions residual stresses sampled solidification cracking specification specimens steel plates stiffeners strain stress concentration stress intensity factor submerged arc welding surface Table temperature tensile test results TMCP transverse tubular joints weld heat treatment weld metal weld toe weldability welded joints welding procedures weldment yield strength