Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 85
Page 48
... Significant differences were not recognized with or without boron in tapes . However lower strain rate gave the ... significant below 0.002 % boron level . This result agrees with earlier reports by Tanaka [ 17 ] and Itoh [ 18 ] . Tanaka ...
... Significant differences were not recognized with or without boron in tapes . However lower strain rate gave the ... significant below 0.002 % boron level . This result agrees with earlier reports by Tanaka [ 17 ] and Itoh [ 18 ] . Tanaka ...
Page 288
... significant difference in initial yielding pattern between the different crack depths . For the bend specimens , the yield zone at the crack tip does not extend to the back surface before the nominal stress causes the surface layer also ...
... significant difference in initial yielding pattern between the different crack depths . For the bend specimens , the yield zone at the crack tip does not extend to the back surface before the nominal stress causes the surface layer also ...
Page 318
... significant fraction of the total time , remain within some predefined ranges from their overall averages . Due to current practice , " a significant fraction " is taken here as 17-20 minutes . The choices of the predefined ranges are ...
... significant fraction of the total time , remain within some predefined ranges from their overall averages . Due to current practice , " a significant fraction " is taken here as 17-20 minutes . The choices of the predefined ranges are ...
Contents
ADVANCED COMPOSITES | 1 |
PAS2m High Performance Prepreg and Composites | 9 |
OFFSHORE TECHNOLOGY GEOTECHNICAL ENGINEERING | 24 |
Copyright | |
39 other sections not shown
Other editions - View all
Common terms and phrases
abrasion accelerated cooled analysis as-welded austenite axial boron brace brittle fracture CGHAZ Charpy Charpy-V chemical composition chord coarse grained concrete Conference on Offshore crack tip CSM CSM CTOD tests CTOD values curves defect dislocations effect electron beam welding fabrication ferrite fiber Figure finite element fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen cracking ICCGHAZ impact increase kJ/mm layup loading low carbon martensite maximum mechanical properties Mechanics and Arctic mid-thickness niobium notch Offshore Mechanics offshore structures Oseberg parameters plastic post weld heat preheat PWHT regions residual stresses sampled solidification cracking specification specimens steel plates stiffeners strain stress concentration stress intensity factor submerged arc welding surface Table temperature tensile test results TMCP transverse tubular joints weld heat treatment weld metal weld toe weldability welded joints welding procedures weldment yield strength