Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 83
Page 289
... specimen was to simulate a small crack at a weld toe . After the pre - fatigue cracking , the specimens ( both BM and LBZ specimens ) were machined to their final shape ( B x B ) . The LBZ specimens were 35 mm and the BM specimens were ...
... specimen was to simulate a small crack at a weld toe . After the pre - fatigue cracking , the specimens ( both BM and LBZ specimens ) were machined to their final shape ( B x B ) . The LBZ specimens were 35 mm and the BM specimens were ...
Page 478
... specimens of candidate tendon alloys in sea water with and without cathodic protection and under loading conditions comparable to those expected in TLP service . EXPERIMENTAL PROCEDURE Materials and Specimens : Two types of 25.4 mm ...
... specimens of candidate tendon alloys in sea water with and without cathodic protection and under loading conditions comparable to those expected in TLP service . EXPERIMENTAL PROCEDURE Materials and Specimens : Two types of 25.4 mm ...
Page 480
... specimens failed near the fusion line on the tube side of the transverse weld . Exceptions were Specimen Y3 which broke along the weld line on the connector side and HY7 where cracks initiated on both sides of the weld . This ...
... specimens failed near the fusion line on the tube side of the transverse weld . Exceptions were Specimen Y3 which broke along the weld line on the connector side and HY7 where cracks initiated on both sides of the weld . This ...
Contents
ADVANCED COMPOSITES | 1 |
PAS2m High Performance Prepreg and Composites | 9 |
OFFSHORE TECHNOLOGY GEOTECHNICAL ENGINEERING | 24 |
Copyright | |
39 other sections not shown
Other editions - View all
Common terms and phrases
abrasion accelerated cooled analysis as-welded austenite axial boron brace brittle fracture CGHAZ Charpy Charpy-V chemical composition chord coarse grained concrete Conference on Offshore crack tip CSM CSM CTOD tests CTOD values curves defect dislocations effect electron beam welding fabrication ferrite fiber Figure finite element fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen cracking ICCGHAZ impact increase kJ/mm layup loading low carbon martensite maximum mechanical properties Mechanics and Arctic mid-thickness niobium notch Offshore Mechanics offshore structures Oseberg parameters plastic post weld heat preheat PWHT regions residual stresses sampled solidification cracking specification specimens steel plates stiffeners strain stress concentration stress intensity factor submerged arc welding surface Table temperature tensile test results TMCP transverse tubular joints weld heat treatment weld metal weld toe weldability welded joints welding procedures weldment yield strength