Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 7, Part 3American Society of Mechanical Engineers, 1988 - Arctic regions |
From inside the book
Results 1-3 of 81
Page 429
... tensile test were carried out on this weld metal3 ) . In this experiment , the depth d of the local brittle zone is ... TENSILE CRITICAL COD The cumulative distributions of the critical COD obtained from the bending COD test ( Experiment ...
... tensile test were carried out on this weld metal3 ) . In this experiment , the depth d of the local brittle zone is ... TENSILE CRITICAL COD The cumulative distributions of the critical COD obtained from the bending COD test ( Experiment ...
Page 430
10 Tensile critical COD , & c ( mm ) 0.1 זיי T זז 100 derived in the respective experiments and are denoted by solid mark if the tensile fracture stress exceeds yield stress ( oy ) of base plate and by open mark when it is lower than oy ...
10 Tensile critical COD , & c ( mm ) 0.1 זיי T זז 100 derived in the respective experiments and are denoted by solid mark if the tensile fracture stress exceeds yield stress ( oy ) of base plate and by open mark when it is lower than oy ...
Page 499
... tensile specimen is an important measure with reference to correlation between bending and tensile critical CTODS . Experimental considerations have been conducted on the relationship between bending critical CTODS and critical CTODS ...
... tensile specimen is an important measure with reference to correlation between bending and tensile critical CTODS . Experimental considerations have been conducted on the relationship between bending critical CTODS and critical CTODS ...
Contents
ADVANCED COMPOSITES | 1 |
PAS2m High Performance Prepreg and Composites | 9 |
OFFSHORE TECHNOLOGY GEOTECHNICAL ENGINEERING | 24 |
Copyright | |
39 other sections not shown
Other editions - View all
Common terms and phrases
abrasion accelerated cooled analysis as-welded austenite axial boron brace brittle fracture CGHAZ Charpy Charpy-V chemical composition chord coarse grained concrete Conference on Offshore crack tip CSM CSM CTOD tests CTOD values curves defect dislocations effect electron beam welding fabrication ferrite fiber Figure finite element fracture mechanics fracture toughness fusion line grain coarsened HAZ HAZ toughness heat affected zone heat input hydrogen cracking ICCGHAZ impact increase kJ/mm layup loading low carbon martensite maximum mechanical properties Mechanics and Arctic mid-thickness niobium notch Offshore Mechanics offshore structures Oseberg parameters plastic post weld heat preheat PWHT regions residual stresses sampled solidification cracking specification specimens steel plates stiffeners strain stress concentration stress intensity factor submerged arc welding surface Table temperature tensile test results TMCP transverse tubular joints weld heat treatment weld metal weld toe weldability welded joints welding procedures weldment yield strength