Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 11, Part 5American Society of Mechanical Engineers, 1992 - Arctic regions |
From inside the book
Results 1-3 of 80
Page 178
... increase in vibration amplitude ) , ( 7 ) when the straked pipeline was upwind of other pipes on the rack , reduction measures greater than 1.0 were observed , Displacement ( inches ) ( 8 ) when the straked pipeline was downwind of ...
... increase in vibration amplitude ) , ( 7 ) when the straked pipeline was upwind of other pipes on the rack , reduction measures greater than 1.0 were observed , Displacement ( inches ) ( 8 ) when the straked pipeline was downwind of ...
Page 469
... increase will be accompanied by an increase in the gas temperature . The error in the initial heat content will tend to decrease the calculated cooldown time ; the error in the gas temperature will tend to increase the calculated ...
... increase will be accompanied by an increase in the gas temperature . The error in the initial heat content will tend to decrease the calculated cooldown time ; the error in the gas temperature will tend to increase the calculated ...
Page 611
... increase in tensile strength O : Q06 % C - 1.5 % Mn - Nb - V - X.C O : 006 % C - X % Mn- Nb - V - Cu - Ni 0.07 % C - 14 % Mn - Nb - V - Cu - X % Ni 5μm YS ( MPa ) = 502 TS ( MPa ) = 632 VE - 20 ( J ) = 255 CVN50 % FATT ( ° C ) = -93 2nd ...
... increase in tensile strength O : Q06 % C - 1.5 % Mn - Nb - V - X.C O : 006 % C - X % Mn- Nb - V - Cu - Ni 0.07 % C - 14 % Mn - Nb - V - Cu - X % Ni 5μm YS ( MPa ) = 502 TS ( MPa ) = 632 VE - 20 ( J ) = 255 CVN50 % FATT ( ° C ) = -93 2nd ...
Contents
MEASUREMENT AND METERING | 1 |
OFFSHORE PIPELINE TECHNOLOGY | 53 |
CODESSTANDARDS AND REGULATIONS | 75 |
Copyright | |
12 other sections not shown
Other editions - View all
Common terms and phrases
Alberta analysis applied Arctic assessment axial bending buckling calculated calibration construction corrosion crack criteria cylinder damage defects depth developed discharge coefficient displacement distribution downstream effect Engineering environmental equation equipment estimated evaluation experimental failure probability fatigue finite element flow function fluid force fractile fracture fracture mechanics frequency frost heave function gas pipeline hoop stress installation leak detection lift force limit Limit States Design load lognormal longitudinal maximum measured Mechanics meter tube methods nozzle offshore pipelines OMAE operating orifice plate parameters pipe wall pipeline spans pipeline system Pipeline Technology ASME plastic predicted pressure ratio reliability Reynolds number S-N curve sample scour shear stress simulation soil specific standards steel strain structural Table Technology ASME 1992 temperature differential tube bundle turbulent upstream usage factor velocity profile vibration volumetric flow rate vortex shedding wall thickness weld yield strength