Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 87
Page 8
Gurney , T.R. , 1977 , " Theoretical Analysis of the Influence of Toe Defects on the Fatigue Strength of Fillet Welded Joints , " Welding Institute Research Report 32 / 1977 / E . Gurney , T.R. , 1979a , " The Influence of Thickness on ...
Gurney , T.R. , 1977 , " Theoretical Analysis of the Influence of Toe Defects on the Fatigue Strength of Fillet Welded Joints , " Welding Institute Research Report 32 / 1977 / E . Gurney , T.R. , 1979a , " The Influence of Thickness on ...
Page 195
The ordinate axis shows non - dimensional values of fatigue strength at 2x10 cycles divided by tensile strength . As is evident from Table 4 and Fig . 6 , the influence of sulfur content on the fatigue strength is not observed in the ...
The ordinate axis shows non - dimensional values of fatigue strength at 2x10 cycles divided by tensile strength . As is evident from Table 4 and Fig . 6 , the influence of sulfur content on the fatigue strength is not observed in the ...
Page 197
( 2 ) Fatigue strength ratio at 2 x106 cycles in corrosive environments is deteriorated to between 1/3 and 1/6 of that in air and the ratio in pH7 is lower than that in pH13.It seems that the QT steels have a little bit lower fatigue ...
( 2 ) Fatigue strength ratio at 2 x106 cycles in corrosive environments is deteriorated to between 1/3 and 1/6 of that in air and the ratio in pH7 is lower than that in pH13.It seems that the QT steels have a little bit lower fatigue ...
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
OFFSHORE MECHANICS | 1 |
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Copyright | |
51 other sections not shown
Other editions - View all
Common terms and phrases
alloys analysis applied attachment base behaviour bending calculated carried chord compared composite Conference constant corrosion crack growth curve cycles depth determined developed distribution element energy Engineering environment equation experimental fabrication failure fatigue crack growth fatigue strength field Figure fracture fracture mechanics function geometry given grade heat higher improved increase indicated influence initiation International length load lower material mean measured Mechanics method normal observed obtained Offshore performed pipe pitting plate predicted presented pressure procedure production propagation properties range ratio reduced reference relation reported resistance samples shown shows similar solution specimens standard steel strain strength stress intensity factor stress range structure surface Table temperature tensile thickness effect toughness tubular joints values wall weld metal weld toe welded joints yield
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3 |
| Contributor | American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division |
| Publisher | American Society of Mechanical Engineers, 1989 |
| Original from | the University of Michigan |
| Digitized | 4 Dec 2007 |
| Export Citation | BiBTeX EndNote RefMan |