Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 77
Page 64
... plate or structure is not sufficiently stiff to support the longitudinal tensile forces , the plate adjacent to the joint line will buckle elastically . Buckling distortion occurs during construction when the fabrication induced forces ...
... plate or structure is not sufficiently stiff to support the longitudinal tensile forces , the plate adjacent to the joint line will buckle elastically . Buckling distortion occurs during construction when the fabrication induced forces ...
Page 438
a ) TUBULAR b ) PLATE - PLATE APPLIED LOAD WELD TOE PLATE EDGE CONSTRAINT Specimen Hot - spot Stress Range Environment ( MPa ) ΡΡΟΙ 175/2252 Air PP1 240 Air PP2 160 Air PP3 240 Sea / FC PP4 160 Sea / FC3 PP5 240 Sea / CP4 PP6 160 Sea ...
a ) TUBULAR b ) PLATE - PLATE APPLIED LOAD WELD TOE PLATE EDGE CONSTRAINT Specimen Hot - spot Stress Range Environment ( MPa ) ΡΡΟΙ 175/2252 Air PP1 240 Air PP2 160 Air PP3 240 Sea / FC PP4 160 Sea / FC3 PP5 240 Sea / CP4 PP6 160 Sea ...
Page 483
... plate velocity and obliquity angle ) should be selected properly so that these lie within the weldability window to ... plate material yield strength of flyer plate material density of flyer plate material dynamic bend angle mass of ...
... plate velocity and obliquity angle ) should be selected properly so that these lie within the weldability window to ... plate material yield strength of flyer plate material density of flyer plate material dynamic bend angle mass of ...
Contents
OFFSHORE MECHANICS | 1 |
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Copyright | |
50 other sections not shown
Other editions - View all
Common terms and phrases
alloy aluminum analysis applied Arctic Engineering ASTM austenite axial base metal behaviour bending brace calculated cathodic protection Charpy chord Conference on Offshore corrosion fatigue crack depth crack growth rate crack initiation crack propagation crevice corrosion CTOD da/dN defects developed energy environment equation experimental fabrication fatigue crack growth fatigue strength fatigue test ferrite Figure fillet welds finite element fracture mechanics fracture toughness geometry grade heat input heat treatment HSLA steels increase influence kJ/cm load material mechanical properties Mechanics and Arctic method microstructure notch obtained Offshore Mechanics offshore structures parameters pipe pitting plate thickness predicted procedure PWHT ratio reduced S-N curves seawater Shoralsim shown in Fig solution specimens Steel in Marine strain stress concentration stress intensity factor stress range submerged arc welding surface crack T-joints Table temperature tensile thickness effect tubular joints values weld metal weld profile weld toe weldability welded joints yield strength