Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 85
Page 16
... predictions of initiation lives of joints tested in air at constant amplitude loading . Also the measured thickness effect on initiation life was correctly estimated by the local strain approach . As an example . predicted S - N curves ...
... predictions of initiation lives of joints tested in air at constant amplitude loading . Also the measured thickness effect on initiation life was correctly estimated by the local strain approach . As an example . predicted S - N curves ...
Page 124
... predicted and observed growth in depth and along the surface is shown in Figure 5 . 4.2.2 Prediction of Fatigue Crack Growth in a Joint with a Large Initial Welding Defect . During the test programme at Delft , one of the joints , known ...
... predicted and observed growth in depth and along the surface is shown in Figure 5 . 4.2.2 Prediction of Fatigue Crack Growth in a Joint with a Large Initial Welding Defect . During the test programme at Delft , one of the joints , known ...
Page 670
... prediction was used : V. V is the ratio between the actual failure load and the predicted tolerable or failure load . Moreover , the ratio K./S . was used to characterise each test result . K and S are the two parameters used in the ...
... prediction was used : V. V is the ratio between the actual failure load and the predicted tolerable or failure load . Moreover , the ratio K./S . was used to characterise each test result . K and S are the two parameters used in the ...
Contents
OFFSHORE MECHANICS | 1 |
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Copyright | |
50 other sections not shown
Other editions - View all
Common terms and phrases
alloy aluminum analysis applied Arctic Engineering ASTM austenite axial base metal behaviour bending brace calculated cathodic protection Charpy chord Conference on Offshore corrosion fatigue crack depth crack growth rate crack initiation crack propagation crevice corrosion CTOD da/dN defects developed energy environment equation experimental fabrication fatigue crack growth fatigue strength fatigue test ferrite Figure fillet welds finite element fracture mechanics fracture toughness geometry grade heat input heat treatment HSLA steels increase influence kJ/cm load material mechanical properties Mechanics and Arctic method microstructure notch obtained Offshore Mechanics offshore structures parameters pipe pitting plate thickness predicted procedure PWHT ratio reduced S-N curves seawater Shoralsim shown in Fig solution specimens Steel in Marine strain stress concentration stress intensity factor stress range submerged arc welding surface crack T-joints Table temperature tensile thickness effect tubular joints values weld metal weld profile weld toe weldability welded joints yield strength