Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 79
Page 322
... ratio Yield to tensile ratio , YR ( % ) 100 Q & T steel 90 80 910 ° C Q⭑T о бој Øy ει log & ( a ) Logo - logɛ relation with Luders ' strain 500 600 700 800 900 1000 Tensile strength , or ( MPa ) Fig . 1 ( b ) Effect of tensile strength ...
... ratio Yield to tensile ratio , YR ( % ) 100 Q & T steel 90 80 910 ° C Q⭑T о бој Øy ει log & ( a ) Logo - logɛ relation with Luders ' strain 500 600 700 800 900 1000 Tensile strength , or ( MPa ) Fig . 1 ( b ) Effect of tensile strength ...
Page 328
... ratio of the steel . It is an important question which level of yield to tensile ratio is most appropriate . There are considerable difficulties for determining that level , since the deformability is not necessarily considered at the ...
... ratio of the steel . It is an important question which level of yield to tensile ratio is most appropriate . There are considerable difficulties for determining that level , since the deformability is not necessarily considered at the ...
Page 670
... ratio of the prediction was used : V. V is the ratio between the actual failure load and the predicted tolerable or failure load . Moreover , the ratio K./S . was used to characterise each test result . K and S are the two parameters ...
... ratio of the prediction was used : V. V is the ratio between the actual failure load and the predicted tolerable or failure load . Moreover , the ratio K./S . was used to characterise each test result . K and S are the two parameters ...
Contents
OFFSHORE MECHANICS | 1 |
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Copyright | |
50 other sections not shown
Other editions - View all
Common terms and phrases
alloy aluminum analysis applied Arctic Engineering ASTM austenite axial base metal behaviour bending brace calculated cathodic protection Charpy chord Conference on Offshore corrosion fatigue crack depth crack growth rate crack initiation crack propagation crevice corrosion CTOD da/dN defects developed energy environment equation experimental fabrication fatigue crack growth fatigue strength fatigue test ferrite Figure fillet welds finite element fracture mechanics fracture toughness geometry grade heat input heat treatment HSLA steels increase influence kJ/cm load material mechanical properties Mechanics and Arctic method microstructure notch obtained Offshore Mechanics offshore structures parameters pipe pitting plate thickness predicted procedure PWHT ratio reduced S-N curves seawater Shoralsim shown in Fig solution specimens Steel in Marine strain stress concentration stress intensity factor stress range submerged arc welding surface crack T-joints Table temperature tensile thickness effect tubular joints values weld metal weld profile weld toe weldability welded joints yield strength