Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 79
Page 73
tion along a through thickness crack in a full thickness specimen can be estimated qualitatively by testing small scale SENB specimens extracted from different through thickness positions and different weld metal microstructures .
tion along a through thickness crack in a full thickness specimen can be estimated qualitatively by testing small scale SENB specimens extracted from different through thickness positions and different weld metal microstructures .
Page 441
A 0.0 5.0 10.0 15.0 20.0 25.0 CRACK DEPTH ( mm ) 0.00 0.0 1 5.0 10.0 15.0 20.0 20.0 25.0 CRACK DEPTH ( mm ) Figure 7 : Crack growth rates for pipe - plate specimens tested at 160 MPa hot - spot stress . The Influence of Optimum Cathodic ...
A 0.0 5.0 10.0 15.0 20.0 25.0 CRACK DEPTH ( mm ) 0.00 0.0 1 5.0 10.0 15.0 20.0 20.0 25.0 CRACK DEPTH ( mm ) Figure 7 : Crack growth rates for pipe - plate specimens tested at 160 MPa hot - spot stress . The Influence of Optimum Cathodic ...
Page 626
The occurrence of the " curved path " in austenitic weld metal with the CGHAZ notched Charpy - V specimen is shown in Figure 10 . In martensitic weld joints , specimens did not show any curved fracture path as observed in almost all ...
The occurrence of the " curved path " in austenitic weld metal with the CGHAZ notched Charpy - V specimen is shown in Figure 10 . In martensitic weld joints , specimens did not show any curved fracture path as observed in almost all ...
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
OFFSHORE MECHANICS | 1 |
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Copyright | |
51 other sections not shown
Other editions - View all
Common terms and phrases
alloys analysis applied attachment base behaviour bending calculated carried chord compared composite Conference constant corrosion crack growth curve cycles depth determined developed distribution element energy Engineering environment equation experimental fabrication failure fatigue crack growth fatigue strength field Figure fracture fracture mechanics function geometry given grade heat higher improved increase indicated influence initiation International length load lower material mean measured Mechanics method normal observed obtained Offshore performed pipe pitting plate predicted presented pressure procedure production propagation properties range ratio reduced reference relation reported resistance samples shown shows similar solution specimens standard steel strain strength stress intensity factor stress range structure surface Table temperature tensile thickness effect toughness tubular joints values wall weld metal weld toe welded joints yield
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3 |
| Contributor | American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division |
| Publisher | American Society of Mechanical Engineers, 1989 |
| Original from | the University of Michigan |
| Digitized | 4 Dec 2007 |
| Export Citation | BiBTeX EndNote RefMan |