Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 84
Page 39
THICKNESS , WELD PROFILE , AND INITIAL FLAW CONSIDERATIONS FOR TUBULAR JOINTS J. L. Grover Aptech Engineering Services Sunnyvale , California + per unit thickness. Abstract This paper investigates some of the ... Tubular Joints Grover.
THICKNESS , WELD PROFILE , AND INITIAL FLAW CONSIDERATIONS FOR TUBULAR JOINTS J. L. Grover Aptech Engineering Services Sunnyvale , California + per unit thickness. Abstract This paper investigates some of the ... Tubular Joints Grover.
Page 159
A LOAD SHEDDING MODEL FOR FRACTURE MECHANICS ANALYSIS OF FATIGUE CRACKS IN TUBULAR JOINTS A. Aaghaakouchak , G. Glinka , and S. Dharmavasan Department of Mechanical Engineering ... Tubular Joints A Aaghaakouchak, G Glinka, and S Dharmavasan.
A LOAD SHEDDING MODEL FOR FRACTURE MECHANICS ANALYSIS OF FATIGUE CRACKS IN TUBULAR JOINTS A. Aaghaakouchak , G. Glinka , and S. Dharmavasan Department of Mechanical Engineering ... Tubular Joints A Aaghaakouchak, G Glinka, and S Dharmavasan.
Page 437
... tubular welded joints . Unfortunately , relatively few tubular joints have been tested in seawater at realistic frequen- cies , and very few where efforts have been made to accurately monitor crack shape development . A novel pipe - to ...
... tubular welded joints . Unfortunately , relatively few tubular joints have been tested in seawater at realistic frequen- cies , and very few where efforts have been made to accurately monitor crack shape development . A novel pipe - to ...
Contents
OFFSHORE MECHANICS | 1 |
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Copyright | |
50 other sections not shown
Other editions - View all
Common terms and phrases
alloy aluminum analysis applied Arctic Engineering ASTM austenite axial base metal behaviour bending brace calculated cathodic protection Charpy chord Conference on Offshore corrosion fatigue crack depth crack growth rate crack initiation crack propagation crevice corrosion CTOD da/dN defects developed energy environment equation experimental fabrication fatigue crack growth fatigue strength fatigue test ferrite Figure fillet welds finite element fracture mechanics fracture toughness geometry grade heat input heat treatment HSLA steels increase influence kJ/cm load material mechanical properties Mechanics and Arctic method microstructure notch obtained Offshore Mechanics offshore structures parameters pipe pitting plate thickness predicted procedure PWHT ratio reduced S-N curves seawater Shoralsim shown in Fig solution specimens Steel in Marine strain stress concentration stress intensity factor stress range submerged arc welding surface crack T-joints Table temperature tensile thickness effect tubular joints values weld metal weld profile weld toe weldability welded joints yield strength