Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3American Society of Mechanical Engineers, 1989 - Arctic regions |
From inside the book
Results 1-3 of 78
Page 125
A fixed hot spot stress of 150 N / mm2 was used , and the fatigue lives were found to increase slightly with brace wall thickness , as shown in Figure 8 . The fatigue resistance of joints with defects from Table 4 was calculated .
A fixed hot spot stress of 150 N / mm2 was used , and the fatigue lives were found to increase slightly with brace wall thickness , as shown in Figure 8 . The fatigue resistance of joints with defects from Table 4 was calculated .
Page 126
Experience of the effects of wall thickness and attachment size from flat plate fillet welded specimens should not be applied to tubular connections . The results suggest that the reduction in mean fatigue life due to increasing the ...
Experience of the effects of wall thickness and attachment size from flat plate fillet welded specimens should not be applied to tubular connections . The results suggest that the reduction in mean fatigue life due to increasing the ...
Page 286
No intermediate columns between skins were included in the design in order not to increase the heat conduction between them . to the wall . The objective was to compare the performance of the aluminum structure subjected to a typical ...
No intermediate columns between skins were included in the design in order not to increase the heat conduction between them . to the wall . The objective was to compare the performance of the aluminum structure subjected to a typical ...
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
OFFSHORE MECHANICS | 1 |
MATERIALS TECHNOLOGY | 9 |
The Plate Thickness Effect in Fatigue Predictions and Results A Review of Norwegian Work | 21 |
Copyright | |
51 other sections not shown
Other editions - View all
Common terms and phrases
alloys analysis applied attachment base behaviour bending calculated carried chord compared composite Conference constant corrosion crack growth curve cycles depth determined developed distribution element energy Engineering environment equation experimental fabrication failure fatigue crack growth fatigue strength field Figure fracture fracture mechanics function geometry given grade heat higher improved increase indicated influence initiation International length load lower material mean measured Mechanics method normal observed obtained Offshore performed pipe pitting plate predicted presented pressure procedure production propagation properties range ratio reduced reference relation reported resistance samples shown shows similar solution specimens standard steel strain strength stress intensity factor stress range structure surface Table temperature tensile thickness effect toughness tubular joints values wall weld metal weld toe welded joints yield
Bibliographic information
| Title | Proceedings of the ... International Conference on Offshore Mechanics and Arctic Engineering, Volume 3; Volume 8, Part 3 |
| Contributor | American Society of Mechanical Engineers. Offshore Mechanics and Arctic Engineering Division |
| Publisher | American Society of Mechanical Engineers, 1989 |
| Original from | the University of Michigan |
| Digitized | 4 Dec 2007 |
| Export Citation | BiBTeX EndNote RefMan |